Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL8X30SB
The AirTAC Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL8X30SB is a genuine HLQ slide-table cylinder, 8 mm bore: a double-acting dual-rod air cylinder integrated with a ball-bearing guide so the table travels straight with high rigidity and low deflection. It delivers about 38 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guideball-bearing guide
- Bore8 mm
- Push thrust @0.5 MPa38 N
- Operating pressure0.2 - 0.7 MPa (29 - 100 psi)
- Port sizeM5x0.8
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
About the Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL8X30SB
The HLQL8X30SB is a symmetrical ball-bearing slide-table cylinder with an 8 mm bore and 30 mm stroke. The integrated linear guide and dual-rod design ensure straight, precise travel, and the floating joint shields the rods from side torque. Ball-bearing guides offer smooth, anti-rust, dust-resistant performance, and the symmetrical body enables balanced mounting on both sides. Dual rods double the thrust versus a single-rod cylinder at the same bore.
This is a genuine AirTAC part with a standard magnet for position sensing. CMSH, DMSH, and EMSH sensor switches mount in the body's dedicated magnetic-switch slots. The B adjuster equips both ends with shock absorbers for smooth, energy-managed stopping at full extend and retract. We confirm exact thrust, dimensions, and allowable load/moment from the manufacturer datasheet or on-page spec table on request.
Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL8X30SB Technical Specifications
| Model | Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL8X30SB |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLQL (ball-bearing guide) |
| Bore | 8 mm |
| Push thrust @0.5 MPa | 38 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.2 - 0.7 MPa (29 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Bore 8 provides light to moderate thrust in a compact, symmetrical ball-bearing slide table. The HLQ ball-bearing family is the right choice where anti-rust and dust-resistant guide operation matter. The 30 mm stroke stays within the bore 8 range. The B adjuster adds shock absorbers at both ends, absorbing kinetic energy for smoother end-of-stroke deceleration than a basic bumper. Thread is standard PT. For allowable load, moment, and deflection, we route you to the published tables and curves.
Applications
Shock-Absorbed Vertical Stop
Shock absorbers at both ends manage the impact of vertical loads for smooth, energy-controlled stopping during extend and retract.
Precision Assembly Slide
Dual-rod ball-bearing guide moves an assembly fixture through a 30 mm stroke with balanced, rust-resistant travel and shock-absorbed stops.
Synchronized Transfer Stage
Symmetrical ball-bearing slide table transfers parts in sync with an adjacent station using smooth, low-deflection guided motion.
FAQ
What does the B adjuster code provide on this model?
B equips both the extension and retraction ends with shock absorbers. This absorbs kinetic energy at end-of-stroke for smoother deceleration than a rubber bumper, which is useful at higher speeds or with heavier moving loads on the 8 mm bore.
How do I confirm allowable load and moment for this slide table?
Allowable load, moment, and kinetic energy are published as tables and deflection curves in the manufacturer datasheet. We confirm the exact values for your bore 8, stroke 30, and ball-bearing guide from the datasheet or on-page spec table on request.