Airtac HLS Precision Slide Cylinder HLS12X50S
The AirTAC Airtac HLS Precision Slide Cylinder HLS12X50S is a genuine HLS slide-table cylinder, 12 mm bore: a double-acting dual-rod air cylinder integrated with a cross-roller guide so the table travels straight with high rigidity and low deflection. It delivers about 85 N of push at 0.5 MPa. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guidecross-roller guide
- Bore12 mm
- Push thrust @0.5 MPa85 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port sizeM5x0.8
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLS Precision Slide Cylinder HLS12X50S
The HLS12X50S is a double-acting dual-rod slide-table cylinder combining an air cylinder with a cross-roller linear guide for straight, high-precision table travel. The cross-roller guide resists deflection under side loads, and the dual rod doubles the thrust available from a bore 12 unit. A floating joint protects the rod from side torque so guide life is extended. The 50 mm stroke provides extended travel for components that need a longer transfer distance, and the basic bumper cushion handles end-of-stroke stopping.
This genuine AirTAC part includes a standard magnet for position sensing with CMSH, DMSH or EMSH switches fitted into the body slots. We verify thrust, dimensions, allowable load and moment from the datasheet or on-page spec table on request so you can confirm every figure before purchasing.
Airtac HLS Precision Slide Cylinder HLS12X50S Technical Specifications
| Model | Airtac HLS Precision Slide Cylinder HLS12X50S |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLS (cross-roller guide) |
| Bore | 12 mm |
| Push thrust @0.5 MPa | 85 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Bore 12 offers moderate thrust in a compact footprint; a larger bore such as 16 or 20 increases push and pull force when payload demands it. The HLS cross-roller guide is selected when rigidity and low deflection are priorities, while the HLQ ball-bearing alternative adds anti-rust and dust-proof benefits. Stroke 50 mm is within the standard range for bore 12. This model has the basic bumper cushion with no adjuster; choose A or B codes if you need rubber stoppers or shock absorbers. Thread is PT. We provide allowable load and moment from published tables and deflection curves for sizing.
Applications
Pick-and-Place Head
Carries a pneumatic gripper for placing small electronic components with cross-roller precision ensuring repeatable positioning across the 50 mm stroke.
Gripper Traverse
Slides a gripper between two pick points in a part-feeding station, with the dual-rod design maintaining parallel travel under off-center loads.
Assembly Stage
Positions a workpiece for a joining or testing operation, relying on the cross-roller guide to hold position against side thrust during the process.
FAQ
Why choose the HLS cross-roller guide over an HLQ ball-bearing table?
The HLS cross-roller guide offers higher rigidity and load capacity with very low deflection, making it better for applications with side loads. The HLQ ball-bearing guide adds corrosion resistance and dust-proof operation where those environmental factors matter.
What is the maximum working pressure for HLS12X50S?
Maximum working pressure is 0.7 MPa (100 psi), with an operating range of 0.15-0.7 MPa (22-100 psi) for bore 12. Never exceed 0.7 MPa. We confirm allowable load and moment from the datasheet on request.