Airtac HLS Precision Slide Cylinder HLS12X75SA
The AirTAC Airtac HLS Precision Slide Cylinder HLS12X75SA is a genuine HLS slide-table cylinder, 12 mm bore: a double-acting dual-rod air cylinder integrated with a cross-roller guide so the table travels straight with high rigidity and low deflection. It delivers about 85 N of push at 0.5 MPa. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guidecross-roller guide
- Bore12 mm
- Push thrust @0.5 MPa85 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port sizeM5x0.8
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLS Precision Slide Cylinder HLS12X75SA
The HLS12X75SA is a double-acting dual-rod slide-table cylinder that integrates an air cylinder with a cross-roller linear guide, so the moving table travels straight with high precision and rigidity. The dual rod doubles the thrust while a floating joint spares the rod from side torque, giving stable push and pull at this 12mm bore and 75mm stroke.
This is a genuine AirTAC part. The magnet is standard, with magnetic-switch slots on the body accepting CMSH/DMSH/EMSH sensors. We confirm thrust, dimensions and load-moment values from the datasheet or on-page table on request.
Airtac HLS Precision Slide Cylinder HLS12X75SA Technical Specifications
| Model | Airtac HLS Precision Slide Cylinder HLS12X75SA |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLS (cross-roller guide) |
| Bore | 12 mm |
| Push thrust @0.5 MPa | 85 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
A 12mm bore gives a moderate thrust step up from the small bores, with bigger push as the bore grows; exact thrust is shown in the spec table. The HLS cross-roller guide suits applications needing high precision, rigidity and low deflection over the 75mm stroke. This unit carries the A adjuster - adjustable rubber stoppers at both ends for cushion control. Thread is PT. For allowable load and moment sizing we route you to the published tables and deflection curves.
Applications
Pick-and-place head
Cross-roller precision guides a small vacuum pickup across the 75mm stroke for repeatable component placement on a PCB assembly line.
Small-parts transfer
Moves a workpiece holder between two stations with low deflection, keeping the part registered during indexing on a light assembly machine.
Gripper traverse
Feeds a parallel gripper laterally between load and unload positions where the cross-roller guide keeps the jaw alignment accurate cycle after cycle.
FAQ
What does the A in HLS12X75SA mean?
A is the adjuster code: adjustable rubber stoppers at both ends. The bore is 12mm, stroke 75mm, and the magnet is standard; thread is PT.
What is the maximum working pressure for this slide table?
Maximum working pressure is 0.7 MPa. Operating range for the 12mm bore is 0.15-0.7 MPa (22-100 psi), with meter-out speed kept at 50-500 mm/s.