Airtac HLS Precision Slide Cylinder HLS12X75SAF
The AirTAC Airtac HLS Precision Slide Cylinder HLS12X75SAF is a genuine HLS slide-table cylinder, 12 mm bore: a double-acting dual-rod air cylinder integrated with a cross-roller guide so the table travels straight with high rigidity and low deflection. It delivers about 85 N of push at 0.5 MPa. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guidecross-roller guide
- Bore12 mm
- Push thrust @0.5 MPa85 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port sizeM5x0.8
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLS Precision Slide Cylinder HLS12X75SAF
The HLS12X75SAF is a double-acting dual-rod slide-table cylinder that pairs an air cylinder with a cross-roller linear guide so the table travels straight with high precision and rigidity. The dual rod doubles the thrust and a floating joint protects the rod from side torque, giving steady push and pull at this 12mm bore and 75mm stroke.
This is a genuine AirTAC part. The magnet is standard, with magnetic-switch slots on the body accepting CMSH/DMSH/EMSH sensors. We confirm thrust, dimensions and load-moment values from the datasheet or on-page table on request.
Airtac HLS Precision Slide Cylinder HLS12X75SAF Technical Specifications
| Model | Airtac HLS Precision Slide Cylinder HLS12X75SAF |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLS (cross-roller guide) |
| Bore | 12 mm |
| Push thrust @0.5 MPa | 85 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
The 12mm bore gives more push than the smaller bores; exact thrust appears in the spec table. The HLS cross-roller guide is chosen where high precision, rigidity and low deflection matter over the 75mm stroke. The AF adjuster puts the adjustable rubber stopper on the retraction side only. Thread is PT. For allowable load and moment we route sizing to the published tables and deflection curves.
Applications
Pick-and-place head
A cross-roller guide carries a small pickup nozzle across the 75mm stroke with repeatable position accuracy for electronic component placement.
Small-parts transfer
Indexes a workpiece carrier between two stations with low deflection, holding part registration during a light assembly cycle.
Gripper traverse
Slides a parallel gripper between load and unload positions where the retraction-side stopper sets the home position accurately each cycle.
FAQ
What does AF mean in HLS12X75SAF?
AF means an adjustable rubber stopper on the retraction side only. The model is a 12mm bore, 75mm stroke, PT-thread HLS slide table with standard magnet.
Where do I find allowable load and moment data?
Allowable load and moment are published in the HLS datasheet tables and deflection curves. We confirm these values for your mounting orientation on request.