Airtac HLS Precision Slide Cylinder HLS16X20SB
The AirTAC Airtac HLS Precision Slide Cylinder HLS16X20SB is a genuine HLS slide-table cylinder, 16 mm bore: a double-acting dual-rod air cylinder integrated with a cross-roller guide so the table travels straight with high rigidity and low deflection. It delivers about 151 N of push at 0.5 MPa. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guidecross-roller guide
- Bore16 mm
- Push thrust @0.5 MPa151 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port sizeM5x0.8
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLS Precision Slide Cylinder HLS16X20SB
The HLS16X20SB is a genuine AirTAC cross-roller slide-table cylinder combining an air cylinder with a high-rigidity cross-roller linear guide. The dual-rod layout doubles the thrust and a floating joint protects the rods from side torque so the table moves straight with minimal deflection. At bore 16 and 20 mm stroke this model provides moderate thrust in a compact body, and the B adjuster equips both ends with shock absorbers for smooth end-of-stroke deceleration.
This unit ships magnet-fitted as standard, with magnetic-switch slots on the body for CMSH, DMSH or EMSH sensors. We verify the exact thrust, dimensions, allowable load and moment from the AirTAC datasheet or the on-page spec table on request.
Airtac HLS Precision Slide Cylinder HLS16X20SB Technical Specifications
| Model | Airtac HLS Precision Slide Cylinder HLS16X20SB |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLS (cross-roller guide) |
| Bore | 16 mm |
| Push thrust @0.5 MPa | 151 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Select the bore for your thrust requirement: larger bores produce more push, and the verified thrust for each bore appears in the on-page spec table. Pick the stroke from the bore 16 published stroke range to suit your travel. The HLS cross-roller guide is ideal when rigidity and precision are the priority; HLQ ball-bearing tables suit anti-rust or dust-proof environments. The B adjuster on this model adds shock absorbers on both extension and retraction sides for energy absorption at end of stroke; note that B-type adjusters are not available on bore 6. Route load and moment sizing to us so we can check the published Wmax, Emax and deflection curves against your duty cycle.
Applications
Precision Pick-and-Place
Carries a gripper for accurate component transfer where the cross-roller guide maintains tight positioning and shock absorbers cushion the 20 mm stroke ends.
Lateral Indexing Shuttle
Shifts small assemblies sideways between workstations with dual-rod stability and shock-absorber cushioning at both travel limits.
Press Feed Stage
Advances a blank into a press fixture using guided thrust, with shock absorbers protecting the end positions from impact loads.
FAQ
How does the B shock-absorber adjuster differ from the A rubber-stopper option?
The B code means shock absorbers are fitted on both extension and retraction sides, giving energy-absorbing cushioning at each end of stroke. The A code uses adjustable rubber stoppers on both ends instead. AS or AF place the rubber stopper on one side only, and BS or BF place the shock absorber on one side only. Shock-absorber options are not available on bore 6.
Can I run the HLS16 above 0.7 MPa?
No. The maximum working pressure is 0.7 MPa. Proof pressure is 1.2 MPa for validation only. For bore 16 the operating range is 0.15 to 0.7 MPa (22 to 100 psi), and we confirm allowable load and moment from the published datasheet on request.