Airtac HLS Precision Slide Cylinder HLS16X50S
The AirTAC Airtac HLS Precision Slide Cylinder HLS16X50S is a genuine HLS slide-table cylinder, 16 mm bore: a double-acting dual-rod air cylinder integrated with a cross-roller guide so the table travels straight with high rigidity and low deflection. It delivers about 151 N of push at 0.5 MPa. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guidecross-roller guide
- Bore16 mm
- Push thrust @0.5 MPa151 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port sizeM5x0.8
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLS Precision Slide Cylinder HLS16X50S
The HLS16X50S is a genuine AirTAC cross-roller slide table cylinder that integrates a double-acting air cylinder with a high-precision linear guide. The cross-roller guide delivers excellent rigidity and low deflection, while the dual-rod design doubles thrust compared to a single-rod unit. A floating joint protects the rods from side torque so the table travels straight and true. At bore 16 mm and 50 mm stroke, this model suits applications needing moderate thrust over a compact travel range.
A standard sintered NdFeB magnet is built in for position sensing with CMSH, DMSH or EMSH switches that mount in the body slots. We confirm exact thrust, dimensions, allowable load and moment values from the AirTAC datasheet or the on-page spec table on request.
Airtac HLS Precision Slide Cylinder HLS16X50S Technical Specifications
| Model | Airtac HLS Precision Slide Cylinder HLS16X50S |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLS (cross-roller guide) |
| Bore | 16 mm |
| Push thrust @0.5 MPa | 151 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Bore 16 mm provides moderate thrust for mid-range pick-and-place or transfer tasks; move to bore 20 or 25 if you need higher push force, or down to bore 8 or 6 for lighter loads. The HLS cross-roller guide is chosen when maximum rigidity and precision matter most - it handles higher loads with less deflection than the HLQ ball-bearing equivalent. The 50 mm stroke falls within the standard bore-16 stroke table. This basic model uses bumper cushions at both ends; choose an A, B, AS, BS, AF or BF suffix variant if you need adjustable rubber stoppers or shock absorbers. Thread is PT as standard; specify G or T for G-thread or NPT ports.
Applications
Pick-and-Place Head
Mount a gripper on the 50 mm stroke table for precise part pick-up and placement with cross-roller guide repeatability.
Small-Parts Transfer
Shuttle lightweight components between conveyor lanes using the dual-rod thrust and rigid cross-roller travel.
Assembly Stage Stopper
Use as a guided stop or positioning slide at an assembly station where bumper cushions arrest travel cleanly.
FAQ
What guide type does the HLS series use and why pick it over HLQ?
HLS uses a cross-roller linear guide, giving the highest rigidity and load capacity among the HL sub-families. Choose HLS when deflection must be minimal; choose HLQ ball-bearing for anti-rust dust-proof duties, or HLH/HLF for miniature or low-height needs.
What is the maximum operating pressure for the HLS16X50S?
Maximum working pressure is 0.7 MPa. For bore 16 the operating range is 0.15-0.7 MPa (22-100 psi). Meter-out speed control should keep travel between 50 and 500 mm/s. We confirm allowable load and moment from the published datasheet tables on request.