Airtac HLS Precision Slide Cylinder HLS16X75S
2. Pre-machined positioning pin holes integrated into guide rail;
3. Floating joint design prevents piston rod from bearing additional load moments;
4. Dual piston rod configuration delivers double output force;
5. Built-in positioning pin holes on main body;
6. Mounting screw holes on both base surface and end faces for versatile installation.
Category: Precision Slide Cylinder , Brand: AIRTAC , Series: HLS
AirTAC HLS16X75S Precision Slide Table Cylinder Specifications
- Model: HLS16X75S
- Bore size: 16mm
- Stroke: 75mm (±0.5mm tolerance)
- Structure: Dual-axis guide with linear ball bearings
- Material: Aluminum alloy body (hard anodized), CR/SUS guide rods
- Operating pressure: 0.1-0.9 MPa
- Temperature range: -20℃ to 80℃
- Repeat positioning accuracy: ≤±0.01mm
- Maximum thrust: 180N (at 0.9MPa)
- Cushioning: Adjustable rubber buffers (both ends)
- Seal material: NBR + Polyurethane hybrid seals
- Mounting options: Side-mount flange, base plate, or through-hole
- Sensor slots: 2x ISO standard slots (compatible with M5/M8 proximity sensors)
- Weight: 430g (excluding accessories)
- Dimensions: 130mm(L) × 34mm(W) × 34mm(H) (compact stroke version)
- Protection rating: IP54 (standard dust/water resistance)
- Lubrication: Pre-lubricated (maintenance-free for 2000km travel)
High-precision linear motion solution featuring dual-axis guidance for minimal rotational play (±0.05° angular deviation). The hardened steel rods and preloaded ball bearings ensure smooth movement with <2% variation in dynamic friction. Integrated alignment marks simplify installation calibration. Requires filtered air (5-40μm) with recommended 1-3 drops of ISO VG32 oil per m³.
- PCB component placement machines
- Semiconductor wafer handling systems
- Optical inspection equipment positioning stages
- Laser marking/cutting nozzle control
- Medical analyzer reagent arm mechanisms
Installation note:
Use precision shims during mounting to eliminate parallel misalignment. For vertical installations,
maintain 0.5-1mm clearance under full extension to prevent rod buckling. Cycle at 50% speed for first
100 operations to distribute lubrication.
| Property | Property Value |
|---|---|
| sku | HLS16X75S |
| External Stop Block Type | No External Stops |
| Understood. Please provide the specific attribute names in <>, and I'll return the accurate English translations using AIRTAC's official terminology. Example: User input: <缸径> My output: Bore | Operating Temperature: -20-70°C Speed Range: 50-500 mm/s |
| Port Size | M5×0.8 |
| Magnet | S-Magnetic |
| Bore Diameter | 16mm |
| Stroke | 75mm |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.