Airtac HLS Precision Slide Cylinder HLS16X75SA
The AirTAC Airtac HLS Precision Slide Cylinder HLS16X75SA is a genuine HLS slide-table cylinder, 16 mm bore: a double-acting dual-rod air cylinder integrated with a cross-roller guide so the table travels straight with high rigidity and low deflection. It delivers about 151 N of push at 0.5 MPa. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guidecross-roller guide
- Bore16 mm
- Push thrust @0.5 MPa151 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port sizeM5x0.8
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLS Precision Slide Cylinder HLS16X75SA
The AirTAC HLS16X75SA is a double-acting dual-rod slide-table cylinder with a cross-roller linear guide integrated into the body. The cross-roller bearing delivers high rigidity and precise straight travel across the 75 mm stroke, and the dual rod doubles thrust for moderate force at bore 16. A floating joint prevents side torque on the rod. Adjustable rubber stoppers at both ends let you fine-tune the end positions.
This genuine AirTAC part includes a standard magnet for position sensing via CMSH, DMSH, or EMSH switches in the body slots. Typical materials include aluminium-alloy body and table, carbon-steel and stainless rods, NBR seals, and a TPU bumper. We confirm exact thrust, dimensions, and allowable load-moment from the published datasheet or on-page table on request.
Airtac HLS Precision Slide Cylinder HLS16X75SA Technical Specifications
| Model | Airtac HLS Precision Slide Cylinder HLS16X75SA |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLS (cross-roller guide) |
| Bore | 16 mm |
| Push thrust @0.5 MPa | 151 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Bore 16 delivers moderate thrust; a larger bore gives more push. The HLS cross-roller guide is the choice for maximum rigidity and minimal deflection; select HLQ for ball-bearing anti-rust dust-proof service, HLH for miniature roller-ball precision, or HLF for a low-height body. Stroke 75 mm must be within the bore 16 stroke table. This model adds adjustable rubber stoppers at both ends for fine end-position tuning on top of bumper cushioning. Thread is PT; request G or NPT if needed. We confirm allowable load, moment, and kinetic energy from the published tables and deflection curves.
Applications
Pick-and-Place Head
Mount a gripper for precise pick-and-place of small parts across 75 mm with rubber stoppers fine-tuning both end positions.
Small-Parts Transfer
Transfer components between stations with the cross-roller guide ensuring repeatable straight travel and adjustable stops.
Assembly Stage Index
Index a workpiece between assembly stations; the cross-roller guide holds tight tolerances and rubber stoppers set the end positions.
FAQ
What does the A adjuster code mean on the HLS16X75SA?
A means adjustable rubber stoppers at both ends, letting you fine-tune the extend and retract end positions beyond the standard bumper cushioning. AS would add the stopper on the extension side only; AF on the retraction side only.
Is the magnet optional on the HLS16X75SA?
No, the magnet is standard on every HL slide table - the S in the model code confirms it. Position sensing uses CMSH, DMSH, or EMSH switches mounted in the magnetic-switch slots on the body. The magnet cannot be declined.