Airtac HLS Precision Slide Cylinder HLS16X75SBF
The AirTAC Airtac HLS Precision Slide Cylinder HLS16X75SBF is a genuine HLS slide-table cylinder, 16 mm bore: a double-acting dual-rod air cylinder integrated with a cross-roller guide so the table travels straight with high rigidity and low deflection. It delivers about 151 N of push at 0.5 MPa. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guidecross-roller guide
- Bore16 mm
- Push thrust @0.5 MPa151 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port sizeM5x0.8
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLS Precision Slide Cylinder HLS16X75SBF
The HLS16X75SBF is a double-acting dual-rod slide-table cylinder that integrates an air cylinder with a cross-roller linear guide, so the moving table travels straight with high precision and rigidity. The cross-roller guide keeps deflection low under load, and the dual rod doubles thrust for a bore 16 mm table at a 75 mm stroke. A floating joint spares the rod from side torque so the guide stays accurate over time. The BF adjuster places a shock absorber on the retraction side for smoother end-of-stroke deceleration.
This is a genuine AirTAC part with a standard magnet for position sensing. Compatible sensor switches include CMSH, DMSH, and EMSH series, which fit the magnetic-switch slots on the body. We confirm exact thrust, dimensions, and allowable load/moment values from the AirTAC datasheet or on-page spec table on request.
Airtac HLS Precision Slide Cylinder HLS16X75SBF Technical Specifications
| Model | Airtac HLS Precision Slide Cylinder HLS16X75SBF |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLS (cross-roller guide) |
| Bore | 16 mm |
| Push thrust @0.5 MPa | 151 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Choose this HLS16 cross-roller slide table when you need higher rigidity and precision than a ball-bearing guide at a 16 mm bore. The 75 mm stroke falls within the bore 16 stroke range. The BF adjuster code means a shock absorber on the retraction side only; if you need cushioning on both ends, look for a B-coded variant. For a bigger bore such as 20 or 25, expect more push for heavier workpieces. Thread is PT (metric tapered) standard; G or NPT versions are available under other suffix codes. Route allowable load, moment, and kinetic-energy sizing to us -- these are published as tables and deflection curves, not single numbers.
Applications
Pick-and-Place Head
Mounts a small gripper for precise vertical or horizontal pick-and-place of electronic components with low deflection at the end of the 75 mm stroke.
Small-Parts Transfer
Transfers small parts between stations on a conveyor line, using the cross-roller guide to maintain positioning accuracy under side load.
Assembly Stage Stopper
Positions a workpiece at an assembly station where the shock absorber on the retraction side softens the stop for delicate parts.
FAQ
What does the BF adjuster code mean on this HLS16 model?
BF indicates a shock absorber on the retraction side only. The basic version has no adjuster, B has shock absorbers on both ends, and BS places the absorber on the extension side. B-type adjusters are not available on bore 6.
What is the maximum operating pressure for this bore 16 slide table?
Maximum working pressure is 0.7 MPa (100 psi). The operating pressure range for bore 12 through 25 is 0.15-0.7 MPa (22-100 psi). Speed should be controlled with meter-out flow to stay within 50-500 mm/s.