Airtac HLS Precision Slide Cylinder HLS20X100SA
The AirTAC Airtac HLS Precision Slide Cylinder HLS20X100SA is a genuine HLS slide-table cylinder, 20 mm bore: a double-acting dual-rod air cylinder integrated with a cross-roller guide so the table travels straight with high rigidity and low deflection. It delivers about 236 N of push at 0.5 MPa. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guidecross-roller guide
- Bore20 mm
- Push thrust @0.5 MPa236 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLS Precision Slide Cylinder HLS20X100SA
The HLS20X100SA is a double-acting dual-rod slide-table cylinder that integrates an air cylinder with a cross-roller linear guide so the moving table travels straight with minimal deflection. The dual-rod layout doubles the thrust, and a floating joint spares the rods from side torque, making it suited for higher-load guided travel at a 100 mm stroke.
This is a genuine AirTAC part with a standard magnet fitted. Sensor switches CMSH, DMSH or EMSH mount in the body slots. We confirm thrust, dimensions and allowable load-moment values from the datasheet or on-page spec table on request.
Airtac HLS Precision Slide Cylinder HLS20X100SA Technical Specifications
| Model | Airtac HLS Precision Slide Cylinder HLS20X100SA |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLS (cross-roller guide) |
| Bore | 20 mm |
| Push thrust @0.5 MPa | 236 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Bore 20 provides higher thrust than the smaller bores in the HLS line, so it fits tasks needing more push along the 100 mm stroke. The cross-roller guide gives high precision and rigidity for heavy or offset loads, making the HLS family the top choice when deflection must be minimized.
This model carries adjustable rubber stoppers at both ends (adjuster A). We route any load, moment or deflection sizing to the published tables and curves - contact us for confirmation.
Applications
Pick-and-Place Traverse
Carries a gripper along a 100 mm stroke with cross-roller precision and doubled thrust for stable part transfer.
Assembly Stage Feed
Moves a workpiece or tooling head straight into an assembly station, relying on the rigid guide to hold position.
Small-Parts Shuttle
Transfers components between stations with minimal deflection, using the dual-rod layout to handle offset loads.
FAQ
What does the adjuster code A mean on this HLS20X100SA?
The A code means the cylinder is fitted with adjustable rubber stoppers at both extension and retraction ends, giving bumper cushioning that you can fine-tune for the 100 mm stroke.
What is the maximum working pressure for this slide table?
Maximum working pressure is 0.7 MPa. Operating range for bore 20 is 0.15-0.7 MPa (22-100 psi). Meter-out speed control should keep travel within 50-500 mm/s.