Airtac HLS Precision Slide Cylinder HLS20X100SAF
The AirTAC Airtac HLS Precision Slide Cylinder HLS20X100SAF is a genuine HLS slide-table cylinder, 20 mm bore: a double-acting dual-rod air cylinder integrated with a cross-roller guide so the table travels straight with high rigidity and low deflection. It delivers about 236 N of push at 0.5 MPa. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guidecross-roller guide
- Bore20 mm
- Push thrust @0.5 MPa236 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLS Precision Slide Cylinder HLS20X100SAF
The HLS20X100SAF is a double-acting dual-rod slide-table cylinder combining an air cylinder with a cross-roller linear guide for straight, low-deflection travel. The dual rods double the thrust, and the floating joint isolates the rods from side torque, fitting higher-load guided motion over a 100 mm stroke.
This is a genuine AirTAC part with a standard magnet. Sensor switches CMSH, DMSH or EMSH fit the body slots. We confirm thrust, dimensions and load-moment data from the datasheet or on-page spec table on request.
Airtac HLS Precision Slide Cylinder HLS20X100SAF Technical Specifications
| Model | Airtac HLS Precision Slide Cylinder HLS20X100SAF |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLS (cross-roller guide) |
| Bore | 20 mm |
| Push thrust @0.5 MPa | 236 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Bore 20 delivers higher thrust than smaller HLS bores, suited where more push is needed along the 100 mm stroke. The cross-roller guide offers top precision and rigidity, making HLS the preferred sub-family when deflection must be minimized.
This model carries an adjustable rubber stopper on the retraction side only (adjuster AF). We route load, moment and deflection sizing to the published tables and curves - contact us for details.
Applications
Gripper Traverse
Positions a gripper accurately over 100 mm, using cross-roller rigidity to keep the tool aligned during part pickup.
Inline Transfer Stopper
Extends to halt small parts on a conveyor, with the retraction-side stopper tuning the retract end of the stroke.
Tooling Head Feed
Advances a drilling or press head along the 100 mm stroke, relying on the dual-rod layout for stable thrust.
FAQ
What does the AF adjuster code mean?
AF means the cylinder has an adjustable rubber stopper on the retraction side only, so cushioning is tunable at the retract end of the 100 mm stroke.
Can you confirm the allowable load and moment for this model?
Yes. Allowable load and moment values are published as tables and deflection curves; we confirm the exact figures from the datasheet for your application on request.