Airtac HLS Precision Slide Cylinder HLS20X100SBF
The AirTAC Airtac HLS Precision Slide Cylinder HLS20X100SBF is a genuine HLS slide-table cylinder, 20 mm bore: a double-acting dual-rod air cylinder integrated with a cross-roller guide so the table travels straight with high rigidity and low deflection. It delivers about 236 N of push at 0.5 MPa. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guidecross-roller guide
- Bore20 mm
- Push thrust @0.5 MPa236 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLS Precision Slide Cylinder HLS20X100SBF
The HLS20X100SBF is a genuine AirTAC double-acting dual-rod slide table cylinder with a cross-roller guide, delivering high precision and rigidity for a 20mm bore and 100mm stroke. The integrated cross-roller guide ensures straight travel with minimal deflection, and the floating joint protects the rod from side torque. The dual-rod design provides higher thrust for bigger bores.
This slide table includes a standard magnet for position sensing, compatible with CMSH, DMSH, and EMSH sensors. We confirm specific thrust, dimensions, and load-moment data from the AirTAC datasheet or on-page spec table upon request.
Airtac HLS Precision Slide Cylinder HLS20X100SBF Technical Specifications
| Model | Airtac HLS Precision Slide Cylinder HLS20X100SBF |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLS (cross-roller guide) |
| Bore | 20 mm |
| Push thrust @0.5 MPa | 236 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Choosing the 20mm bore ensures adequate thrust, and the cross-roller guide in the HLS series provides maximum rigidity and load capacity. The 100mm stroke fits the bore's specification table. The BF adjuster adds a shock absorber on the retraction side to absorb impact at the end of the return stroke. Thread is PT standard with a 1/8 inch port. Load and moment sizing should be routed to us using the published tables and deflection curves.
Applications
Gripper Traverse
Guides grippers with low deflection for accurate part handling during traverse movements.
Stopper Mechanism
Acts as a precise stopper for items on a conveyor, absorbing retraction impacts with the shock absorber.
Component Insertion
Provides the rigidity needed to push components into place during automated assembly.
FAQ
What is the difference between B and BF adjuster codes?
The B code places shock absorbers on both ends, while BF places a shock absorber only on the retraction side to manage the return stroke impact.
How is load and moment sizing determined for the HLS series?
Allowable load, moment, and kinetic energy are published as tables and deflection curves in the datasheet, which we confirm on request.