Airtac HLS Precision Slide Cylinder HLS20X150SAF
2. Pre-machined positioning pin holes integrated into guide rail;
3. Floating joint design prevents piston rod from bearing additional load moments;
4. Dual piston rod configuration delivers double output force;
5. Built-in positioning pin holes on main body;
6. Mounting screw holes on both base surface and end faces for versatile installation.
Category: Precision Slide Cylinder , Brand: AIRTAC , Series: HLS
AirTAC HLS20X150SAF Precision Slide Table Cylinder Specifications
- Model: HLS20X150SAF
- Bore size: 20mm
- Stroke: 150mm (±0.5mm tolerance)
- Operating pressure: 0.1–0.7 MPa
- Max thrust: 83N (at 0.5MPa)
- Max speed: 500mm/s
- Repeat positioning accuracy: ±0.01mm
- Guide type: Dual linear ball bearings
- Rod material: Hardened stainless steel (SUS420)
- Body material: Anodized aluminum alloy
- Seal type: NBR/PU hybrid seals
- Temperature range: -10℃ to 80℃
- Weight: 1.65kg (excluding accessories)
- Dimensions: 242mm(L) × 45mm(W) × 45mm(H)
- Mounting: Dual-axis adjustable base with M5 threaded holes
- Cushioning: Adjustable air cushion (0-5mm stroke adjustment)
High-rigidity linear actuator combining pneumatic power with precision guidance, featuring low-friction operation and zero-backlash transmission. The chrome-plated shaft and preloaded ball bearings ensure smooth motion repeatability. Integrated T-slot design allows direct mounting of sensors or tooling plates.
- PCB component insertion machines
- Lens coating equipment positioning stages
- Pharmaceutical blister packaging systems
- Semiconductor wafer handling robots
- Precision optical alignment fixtures
Installation note:
Lubricate guide rails with ISO VG32 hydraulic oil before initial use.
Avoid side-load exceeding 15N·m. For vertical mounting,
use auxiliary support brackets (sold separately).
Critical parameters:
Maintain air filtration at ≤5μm with auto-drain function.
Allow 10-minute warm-up for sub-micron positioning tasks.
Annual re-lubrication required for maintenance.
| Property | Property Value |
|---|---|
| sku | HLS20X150SAF |
| External Stop Block Type | Rear end stroke adjusting screw |
| Understood. Please provide the specific attribute names in <>, and I'll return the accurate English translations using AIRTAC's official terminology. Example: User input: <缸径> My output: Bore | Operating Temperature: -20-70°C Speed Range: 50-500 mm/s |
| Port Size | PT1/8 |
| Magnet | S-Magnetic |
| Bore Diameter | <20mm> |
| Stroke | 150mm |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.