Airtac HLS Precision Slide Cylinder HLS20X30S
The AirTAC Airtac HLS Precision Slide Cylinder HLS20X30S is a genuine HLS slide-table cylinder, 20 mm bore: a double-acting dual-rod air cylinder integrated with a cross-roller guide so the table travels straight with high rigidity and low deflection. It delivers about 236 N of push at 0.5 MPa. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guidecross-roller guide
- Bore20 mm
- Push thrust @0.5 MPa236 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLS Precision Slide Cylinder HLS20X30S
The HLS20X30S is a cross-roller guided slide-table cylinder with a 20 mm bore and 30 mm stroke. The integrated linear guide ensures straight travel of the moving table, while dual rods double the thrust. A floating joint prevents side torque from reaching the rods, and the cross-roller construction delivers high rigidity and precise positioning.
This is a genuine AirTAC part with a standard magnet. CMSH, DMSH, and EMSH sensor switches fit the body slots. The basic cushion uses bumper pads at both stroke ends. We confirm thrust, dimensions, load, and moment from the AirTAC datasheet or on-page spec table on request.
Airtac HLS Precision Slide Cylinder HLS20X30S Technical Specifications
| Model | Airtac HLS Precision Slide Cylinder HLS20X30S |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLS (cross-roller guide) |
| Bore | 20 mm |
| Push thrust @0.5 MPa | 236 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Bore 20 provides higher thrust than smaller HLS bores for applications needing more push force. The 30 mm stroke is within the standard range for this bore. The HLS cross-roller guide offers maximum rigidity and low deflection among the HL slide-table families; choose HLQ for anti-rust or dust-proof needs, HLH for miniature precision assembly, or HLF for a lower body height. This model uses basic bumper cushioning; consider A or B adjuster options for rubber stoppers or shock absorbers if your load needs controlled deceleration. Standard thread is PT; request G or NPT if needed. Contact us for allowable load and moment sizing from published AirTAC tables and curves.
Applications
Gripper Traverse
Moves a gripper along 30 mm with cross-roller precision for repeatable pick-and-place cycles.
Assembly Stage
Positions components at an assembly station with rigid guided travel and dual-rod thrust.
Small-Parts Shuttle
Transfers small parts between processing stations with straight-line accuracy.
FAQ
How do I choose between HLS and HLQ guide types?
HLS uses cross-roller guides for the highest rigidity and lowest deflection, ideal where precision and load capacity matter most. HLQ uses ball bearings with anti-rust and dust-proof properties, better suited to cleaner or corrosive environments. Both are available in bore 20 with the same range of adjuster and thread options.
What pressure range can the HLS20X30S operate in?
Bore 20 operates at 0.15 to 0.7 MPa (22 to 100 psi). Never exceed 0.7 MPa maximum working pressure. Meter-out speed control keeps travel between 50 and 500 mm/s. We confirm allowable load and moment from the AirTAC datasheet on request.