Airtac HLS Precision Slide Cylinder HLS20X30SB
The AirTAC Airtac HLS Precision Slide Cylinder HLS20X30SB is a genuine HLS slide-table cylinder, 20 mm bore: a double-acting dual-rod air cylinder integrated with a cross-roller guide so the table travels straight with high rigidity and low deflection. It delivers about 236 N of push at 0.5 MPa. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guidecross-roller guide
- Bore20 mm
- Push thrust @0.5 MPa236 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLS Precision Slide Cylinder HLS20X30SB
The HLS20X30SB is a genuine AirTAC cross-roller slide-table cylinder integrating a 20 mm bore dual-rod air cylinder with a high-rigidity cross-roller linear guide. The table moves in a straight line with minimal deflection; the dual rod provides higher thrust appropriate for a 20 mm bore, and a floating joint isolates the rod from side torque. Shock absorbers on both ends deliver smooth deceleration at higher speeds.
The magnet is standard, enabling detection with AirTAC CMSH, DMSH, or EMSH sensor switches in the body slots. We validate the exact thrust, dimensions, load, and moment figures from the AirTAC datasheet or on-page spec table on request.
Airtac HLS Precision Slide Cylinder HLS20X30SB Technical Specifications
| Model | Airtac HLS Precision Slide Cylinder HLS20X30SB |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLS (cross-roller guide) |
| Bore | 20 mm |
| Push thrust @0.5 MPa | 236 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Select a 20 mm bore when higher thrust is needed than smaller bores offer, in the same compact slide-table envelope. The HLS cross-roller guide delivers the highest precision and rigidity of AirTAC slide tables for applications where deflection is a concern. The 30 mm stroke sits within the bore's published stroke table. Shock absorbers on both ends handle higher kinetic energy at faster speeds; thread is PT. Allowable load, moment, and kinetic energy values are confirmed from the published tables and deflection curves on request.
Applications
Pick-and-Place Head
Mounts a small gripper for precise component placement on a PCB assembly line where cross-roller guidance keeps deflection under control.
Small-Parts Transfer
Transfers small parts between conveyor stations with a straight 30 mm stroke and a floating joint that protects the rod from mounting misalignment.
Assembly Stage Index
Indexes a workpiece into a fixture with shock absorbers on both ends cushioning the stop for smooth, repeatable assembly operations.
FAQ
When should I choose the B shock-absorber option instead of a rubber stopper?
The B option fits shock absorbers on both ends, which is better when the slide carries higher kinetic energy at faster speeds and needs smooth deceleration. It is not available on bore 6 but is supported on the 20 mm bore.
How do I confirm the allowable load and moment for this slide table?
Load, moment, and kinetic energy limits are published as tables and deflection curves in the AirTAC datasheet. We confirm the exact values for your 20 mm bore and 30 mm stroke on request; do not estimate from generic figures.