Airtac HLS Precision Slide Cylinder HLS20X75SAS
The AirTAC Airtac HLS Precision Slide Cylinder HLS20X75SAS is a genuine HLS slide-table cylinder, 20 mm bore: a double-acting dual-rod air cylinder integrated with a cross-roller guide so the table travels straight with high rigidity and low deflection. It delivers about 236 N of push at 0.5 MPa. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guidecross-roller guide
- Bore20 mm
- Push thrust @0.5 MPa236 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLS Precision Slide Cylinder HLS20X75SAS
The HLS20X75SAS is a double-acting dual-rod slide-table cylinder that combines a cross-roller linear guide with an air cylinder in one integrated body. At bore 20mm and stroke 75mm, the cross-roller guide delivers high rigidity and low deflection for precise straight-line motion. The dual rod doubles thrust for a bigger bore, and the floating joint protects the rod from side torque.
This is a genuine AirTAC part with a standard magnet fitted for position sensing. Sensor switches from the CMSH, DMSH, and EMSH series mount in the body slots. We confirm exact thrust, dimensions, and allowable load/moment from the AirTAC datasheet or on-page specification table on request.
Airtac HLS Precision Slide Cylinder HLS20X75SAS Technical Specifications
| Model | Airtac HLS Precision Slide Cylinder HLS20X75SAS |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLS (cross-roller guide) |
| Bore | 20 mm |
| Push thrust @0.5 MPa | 236 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Select the 20mm bore for higher thrust in the HLS family; a larger bore increases push force within the same slide-table envelope. The HLS cross-roller guide is chosen when maximum rigidity and precision are needed over HLQ ball-bearing or HLF low-height options. Stroke 75mm is within the bore 20 range. The AS adjuster adds an adjustable rubber stopper on the extension side for fine-tuned forward end positioning; port threads are PT.
Allowable load, moment, and kinetic energy are published as tables and deflection curves. We can route sizing to those published values for your specific application.
Applications
Assembly Stage Traverse
Cross-roller precision positions an assembly fixture accurately across the 75mm stroke for repeatable joining operations.
Component Transfer
The dual-rod design moves parts between workstations with guided straight-line travel and minimal deflection under load.
Stopper Mechanism
The extension-side rubber stopper lets you set a precise forward stopping point for indexing or pausing a workpiece.
FAQ
What does the AS adjuster code mean on this HLS slide table?
AS indicates an adjustable rubber stopper on the extension side only. You can fine-tune the forward end position while the retraction side uses the standard bumper cushion.
Can I confirm load and moment capacity for this slide table?
Yes. Allowable load, moment, and kinetic energy are published as tables and deflection curves in the AirTAC datasheet. Contact us and we will confirm the values for your specific mounting and payload.