Airtac HLS Precision Slide Cylinder HLS20X75SBS
The AirTAC Airtac HLS Precision Slide Cylinder HLS20X75SBS is a genuine HLS slide-table cylinder, 20 mm bore: a double-acting dual-rod air cylinder integrated with a cross-roller guide so the table travels straight with high rigidity and low deflection. It delivers about 236 N of push at 0.5 MPa. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guidecross-roller guide
- Bore20 mm
- Push thrust @0.5 MPa236 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLS Precision Slide Cylinder HLS20X75SBS
The HLS20X75SBS is a double-acting dual-rod slide-table cylinder integrating a cross-roller linear guide for high-precision, rigid guidance with minimal deflection. The 20 mm bore and 75 mm stroke yield higher thrust than the smaller bores, and the dual rods double the force output while a floating joint isolates the rods from side torque. A shock absorber on the extension side absorbs end-of-stroke energy during the forward stroke, protecting the guide when the extend cycle carries momentum or load.
This genuine AirTAC cylinder comes with a standard magnet for position detection. Sensor switches from the CMSH, DMSH, and EMSH ranges fit the body's magnetic-switch slots. We verify thrust, dimensions, and load/moment ratings from the manufacturer datasheet or the on-page specification table on request.
Airtac HLS Precision Slide Cylinder HLS20X75SBS Technical Specifications
| Model | Airtac HLS Precision Slide Cylinder HLS20X75SBS |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLS (cross-roller guide) |
| Bore | 20 mm |
| Push thrust @0.5 MPa | 236 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Choose the HLS cross-roller guide when precision and rigidity are the priority over the dust-resistant HLQ ball-bearing option. The 20 mm bore offers higher thrust than the 6 or 8 mm bores while remaining compact; step up to 25 mm if the application requires more push force. The 75 mm stroke is within the standard range for this bore - verify against the bore's stroke table. The BS adjuster adds a shock absorber on the extension side, suited to forward-stroke energy absorption. Ports use PT thread. We route load and moment sizing to the published Wmax and moment tables and deflection curves on request.
Applications
Gripper Traverse
Carries a gripper across a 75 mm stroke to transfer parts between two fixtures with cross-roller straightness.
Component Insertion
Pushes a connector into a socket with guided precision on the forward stroke, cushioned by the extend-side shock absorber.
Sorting Diverter
Slides a diverter gate to route small packages on a sortation conveyor with repeatable 75 mm travel.
FAQ
How does the BS adjuster differ from BF on the HLS20X75SBS?
B specifies a shock absorber, and S places it on the extension (forward) side. The retraction side uses a standard bumper. Choose BS when the forward stroke carries more kinetic energy, or BF when the return stroke does.
Can I run the cylinder at speeds above 500 mm/s?
No. The rated speed range is 50 to 500 mm/s with meter-out flow control. Exceeding 500 mm/s risks damaging the bumper or shock absorber and reduces guide life. We recommend meter-out speed control at both ports.