Airtac HLS Precision Slide Cylinder HLS25X10SA
The AirTAC Airtac HLS Precision Slide Cylinder HLS25X10SA is a genuine HLS slide-table cylinder, 25 mm bore: a double-acting dual-rod air cylinder integrated with a cross-roller guide so the table travels straight with high rigidity and low deflection. It delivers about 378 N of push at 0.5 MPa. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guidecross-roller guide
- Bore25 mm
- Push thrust @0.5 MPa378 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLS Precision Slide Cylinder HLS25X10SA
The HLS25X10SA is a genuine AirTAC cross-roller slide-table cylinder with a 25 mm bore, 10 mm stroke, and adjustable rubber stoppers at both ends. It integrates an air cylinder with a cross-roller linear guide so the moving table travels straight with minimal deflection. The dual rod doubles the thrust and a floating joint protects the rod from side torque, while the cross-roller guide delivers the highest precision and rigidity in the HLS family.
The magnet is standard, enabling position sensing with CMSH, DMSH, or EMSH switch sensors in the body slots. We confirm thrust, dimensions, and load-moment values from the AirTAC datasheet or on-page spec table on request.
Airtac HLS Precision Slide Cylinder HLS25X10SA Technical Specifications
| Model | Airtac HLS Precision Slide Cylinder HLS25X10SA |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLS (cross-roller guide) |
| Bore | 25 mm |
| Push thrust @0.5 MPa | 378 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
A 25 mm bore gives higher thrust than smaller bores in the HLS range, making it suitable for applications needing more push in a compact footprint. Choose the HLS cross-roller guide when rigidity and precision matter most. The A adjuster code means adjustable rubber stoppers on both extension and retraction ends for controlled end-of-stroke contact. Stroke must stay within the bore 25 stroke table. PT (tapered) threads are standard.
Route load, moment, and deflection sizing to us - AirTAC publishes Wmax, Emax, and moment as tables and deflection as curves that we confirm against your application.
Applications
Gripper Traverse
Moves a gripper horizontally between two fixed stop points, with adjustable rubber stoppers softening end-of-stroke impact at each end.
Assembly Stage Positioner
Indexes a small workpiece into an assembly fixture with cross-roller precision, holding position firmly under the dual-rod thrust.
Sorting Diverter
Diverts small parts on a line with repeatable 10 mm travel, relying on cross-roller straightness for consistent positioning.
FAQ
What does the A in HLS25X10SA mean for the stopper configuration?
The A code means adjustable rubber stoppers are fitted on both the extension and retraction ends. This gives you tunable end-of-stroke cushioning without a shock absorber. If you need shock absorbers instead, choose a B-code model, or for single-side stoppers use AS (extension) or AF (retraction).
Can I run this cylinder at 1.0 MPa?
No. Maximum working pressure is 0.7 MPa (100 psi). For bore 25 the operating range is 0.15-0.7 MPa (22-100 psi). Proof pressure is 1.2 MPa (175 psi) for qualification only, not for continuous operation.