Airtac HLS Precision Slide Cylinder HLS25X125SA
2. Pre-machined positioning pin holes integrated into guide rail;
3. Floating joint design prevents piston rod from bearing additional load moments;
4. Dual piston rod configuration delivers double output force;
5. Built-in positioning pin holes on main body;
6. Mounting screw holes on both base surface and end faces for versatile installation.
Category: Precision Slide Cylinder , Brand: AIRTAC , Series: HLS
AirTAC HLS25X125SA Precision Slide Table Cylinder Specifications
- Model: HLS25X125SA
- Type: Guided precision slide cylinder (double-acting)
- Bore size: Ø25mm
- Stroke: 125mm (±0.5mm tolerance)
- Operating pressure: 0.1–0.8 MPa
- Cushioning: Adjustable pneumatic cushion at both ends
- Repeat positioning accuracy: ≤±0.01mm
- Max. thrust: 78N at 0.5MPa
- Max. speed: 500mm/s
- Mounting options: Horizontal/Vertical/Inverted
- Guide mechanism: Linear ball bearing cross-roller structure
- Seal material: Nitrile rubber (NBR) with wear-resistant ring
- Temperature range: -10℃ to 70℃
- Weight: 1.85kg (excluding accessories)
- Dimensions: 280mm(L) × 45mm(W) × 50mm(H)
- Rod end type: Female thread M6×1.0
- Lubrication: Pre-lubricated (relubrication interval: 1,000km travel)
Ultra-precision guided cylinder combining pneumatic actuation with linear guide technology, featuring near-zero backlash (≤0.03mm) and minimal friction coefficient (μ<0.003). The dual-sealed structure with wiper scraper prevents particulate ingress in ISO Class 3 clean environments. Includes magnetic piston for position feedback compatibility.
- PCB component insertion machines
- Semiconductor wafer handling systems
- Lens polishing equipment positioning stages
- Pharmaceutical blister packaging automation
- 3D measurement probe positioning
Operation note:
Requires 5μm filtered air supply. For vertical mounting,
use locking nuts (M6×0.5) with 0.8Nm torque limit.
Avoid lateral loading exceeding 15N·m. Warm-up with 5-10
low-speed cycles before high-precision operations.
| Property | Property Value |
|---|---|
| sku | HLS25X125SA |
| External Stop Block Type | Stroke Adjustment Screws at Both Ends |
| Understood. Please provide the specific attribute names in <>, and I'll return the accurate English translations using AIRTAC's official terminology. Example: User input: <缸径> My output: Bore | Operating Temperature: -20-70°C Speed Range: 50-500 mm/s |
| Port Size | PT1/8 |
| Magnet | S-Magnetic |
| Bore Diameter | <25 mm> |
| Stroke | 125mm |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.