Airtac HLS Precision Slide Cylinder HLS25X125SB
The AirTAC Airtac HLS Precision Slide Cylinder HLS25X125SB is a genuine HLS slide-table cylinder, 25 mm bore: a double-acting dual-rod air cylinder integrated with a cross-roller guide so the table travels straight with high rigidity and low deflection. It delivers about 378 N of push at 0.5 MPa. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guidecross-roller guide
- Bore25 mm
- Push thrust @0.5 MPa378 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLS Precision Slide Cylinder HLS25X125SB
A slide-table cylinder integrates an air cylinder with a linear guide so the moving table travels straight with minimal deflection. The HLS cross-roller guide provides the highest precision and rigidity in the AirTAC slide-table range. This HLS25X125SB pairs a 25 mm bore with a 125 mm stroke; the dual-rod design doubles the thrust and a floating joint spares the rods from side torque. Shock absorbers on both ends absorb impact energy for smoother stops at higher travel speeds.
This is a genuine AirTAC part with a standard magnet fitted for position sensing. Compatible sensor switches are CMSH, DMSH, and EMSH, which mount in the magnetic-switch slots on the body. We confirm exact thrust, dimensions, and allowable load/moment from the AirTAC datasheet or on-page spec table on request.
Airtac HLS Precision Slide Cylinder HLS25X125SB Technical Specifications
| Model | Airtac HLS Precision Slide Cylinder HLS25X125SB |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLS (cross-roller guide) |
| Bore | 25 mm |
| Push thrust @0.5 MPa | 378 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
The 25 mm bore is the largest in the HLS cross-roller range, providing higher thrust for heavier guided loads without increasing deflection. Choose the HLS cross-roller guide when you need maximum rigidity and precision; choose HLQ for ball-bearing anti-rust dust-proof duty, HLH for miniature roller-ball straightness with three port groups, or HLF for a low-height body. Keep the stroke within the bore 25 table. The B adjuster adds shock absorbers on both ends; B-type adjusters are not available on bore 6. Ports are 1/8" with PT thread. We route load-moment and deflection sizing to the published tables and curves.
Applications
High-Speed Pick-and-Place
Use the shock-absorber cushioning to run pick-and-place cycles at higher speeds while the cross-roller guide keeps positioning precise.
Part Transfer Shuttle
Shuttle small parts 125 mm between stations with smooth deceleration at both ends protecting the workpiece and fixture.
Assembly Stage Traverse
Move a workpiece between assembly stations with the rigid cross-roller guide maintaining alignment under load and impact.
FAQ
What does the B adjuster code mean on this HLS model?
B means shock absorbers on both ends, which absorb kinetic energy for smoother stops at higher travel speeds. B-type adjusters are available on all HLS bores except bore 6. Related options are BS (extension side only) and BF (retraction side only).
What is the maximum working pressure for this bore 25 slide table?
The maximum working pressure is 0.7 MPa (100 psi). For bore 25 the operating range is 0.15-0.7 MPa (22-100 psi). Keep travel speed at or below 500 mm/s using meter-out flow control.