Airtac HLS Precision Slide Cylinder HLS25X150S
The AirTAC Airtac HLS Precision Slide Cylinder HLS25X150S is a genuine HLS slide-table cylinder, 25 mm bore: a double-acting dual-rod air cylinder integrated with a cross-roller guide so the table travels straight with high rigidity and low deflection. It delivers about 378 N of push at 0.5 MPa. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guidecross-roller guide
- Bore25 mm
- Push thrust @0.5 MPa378 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLS Precision Slide Cylinder HLS25X150S
The AirTAC HLS25X150S is a double-acting dual-rod slide-table cylinder integrating a cross-roller linear guide, bore 25 mm and stroke 150 mm. The cross-roller guide provides high precision and rigidity with low deflection, while the dual rod doubles thrust and the floating joint protects the rod from side torque. The basic bumper cushion is standard at both ends.
This is a genuine AirTAC part with a standard magnet for position sensing; compatible sensor switches include CMSH, DMSH and EMSH in the body's magnetic-switch slots. We confirm exact thrust, dimensions and allowable load-moment from the datasheet or on-page spec table on request.
Airtac HLS Precision Slide Cylinder HLS25X150S Technical Specifications
| Model | Airtac HLS Precision Slide Cylinder HLS25X150S |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLS (cross-roller guide) |
| Bore | 25 mm |
| Push thrust @0.5 MPa | 378 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Bore 25 provides higher thrust for heavier workpieces compared to smaller bores in the HLS cross-roller range. Choose HLS when rigidity and precision are the priority; HLQ suits anti-rust dust-proof environments and HLF offers a lower body height. Stroke 150 mm fits within the bore 25 stroke table. This model has the basic bumper cushion with no optional shock absorber or rubber stopper; thread is PT. Route load and moment sizing to us for the published tables and deflection curves.
Applications
Pick-and-place traverse
Moves a gripper or suction cup over a 150 mm stroke for precise part placement, the cross-roller guide maintaining tight positional accuracy throughout.
Long-stroke parts transfer
Transfers components across a wider conveyor gap with straight cross-roller guided travel at up to 500 mm/s.
Tooling-stage slide
Positions a tooling plate or workpiece carrier at an assembly station where the cross-roller guide ensures repeatable straight-line positioning.
FAQ
Does the HLS25X150S include an adjustable stopper or shock absorber?
No. The blank adjuster field means this model uses the standard bumper cushion at both ends. For shock absorbers choose B, BS or BF; for rubber stoppers choose A, AS or AF. These options are available on HLS bore 8 and above.
What is the maximum operating pressure for the HLS25X150S?
Maximum working pressure is 0.7 MPa (100 psi). For bore 25 the operating range is 0.15-0.7 MPa (22-100 psi). Allowable load, moment and deflection are confirmed from published datasheet tables and curves on request.