Airtac HLS Precision Slide Cylinder HLS25X150SB
The AirTAC Airtac HLS Precision Slide Cylinder HLS25X150SB is a genuine HLS slide-table cylinder, 25 mm bore: a double-acting dual-rod air cylinder integrated with a cross-roller guide so the table travels straight with high rigidity and low deflection. It delivers about 378 N of push at 0.5 MPa. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guidecross-roller guide
- Bore25 mm
- Push thrust @0.5 MPa378 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLS Precision Slide Cylinder HLS25X150SB
The HLS25X150SB is a double-acting dual-rod slide-table cylinder that integrates an air cylinder with a cross-roller linear guide. The moving table travels in a straight line, the dual rod doubles the thrust, and a floating joint spares the rod from side torque. The 25mm bore delivers higher thrust for a bigger bore, and the cross-roller guide provides the highest precision, rigidity and load capacity in the HLS family.
This is a genuine AirTAC part with a standard magnet and magnetic-switch slots for CMSH, DMSH or EMSH sensors. We confirm the exact thrust, dimensions, allowable load and moment from the datasheet or on-page table on request.
Airtac HLS Precision Slide Cylinder HLS25X150SB Technical Specifications
| Model | Airtac HLS Precision Slide Cylinder HLS25X150SB |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLS (cross-roller guide) |
| Bore | 25 mm |
| Push thrust @0.5 MPa | 378 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Choose the 25mm bore when your application needs higher thrust from a bigger bore; the cross-roller guide suits the most demanding precision and rigidity requirements. The 150mm stroke is selected within the bore's table, and the B adjuster specifies shock absorbers at both ends to manage end-of-stroke energy. Thread is PT.
Applications
Precision Pick-and-Place
Cross-roller guidance and shock absorbers both ends suit accurate pick-and-place moves where the 150mm stroke and 25mm bore provide higher thrust for heavier tools.
Assembly Stage Traverse
The rigid cross-roller table carries a workpiece or tool head across an assembly station with low deflection and smooth end-of-stroke deceleration.
Small-Parts Transfer
Straight, repeatable travel transfers small parts between conveyor lanes or fixtures with the dual rod delivering reliable push force.
FAQ
What does the B adjuster code mean on HLS25X150SB?
B means a shock absorber is fitted at both ends of the stroke to absorb end-of-stroke energy, giving smoother deceleration than a basic bumper. B-type adjusters are available on bores 12 and larger, not on bore 6.
What is the maximum working pressure for the HLS25X150SB?
The maximum working pressure is 0.7 MPa (100 psi). The operating pressure range for the 25mm bore is 0.15 to 0.7 MPa (22 to 100 psi). Meter-out speed control keeps travel within the 50 to 500 mm/s range.