Airtac HLS Precision Slide Cylinder HLS25X150SBF
The AirTAC Airtac HLS Precision Slide Cylinder HLS25X150SBF is a genuine HLS slide-table cylinder, 25 mm bore: a double-acting dual-rod air cylinder integrated with a cross-roller guide so the table travels straight with high rigidity and low deflection. It delivers about 378 N of push at 0.5 MPa. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guidecross-roller guide
- Bore25 mm
- Push thrust @0.5 MPa378 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLS Precision Slide Cylinder HLS25X150SBF
The HLS25X150SBF is a double-acting dual-rod slide-table cylinder that integrates an air cylinder with a cross-roller linear guide. The moving table travels in a straight line, the dual rod doubles the thrust, and a floating joint spares the rod from side torque. The 25mm bore delivers higher thrust for a bigger bore, and the cross-roller guide provides the highest precision, rigidity and load capacity in the HLS family.
This is a genuine AirTAC part with a standard magnet and magnetic-switch slots for CMSH, DMSH or EMSH sensors. We confirm the exact thrust, dimensions, allowable load and moment from the datasheet or on-page table on request.
Airtac HLS Precision Slide Cylinder HLS25X150SBF Technical Specifications
| Model | Airtac HLS Precision Slide Cylinder HLS25X150SBF |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLS (cross-roller guide) |
| Bore | 25 mm |
| Push thrust @0.5 MPa | 378 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Choose the 25mm bore when your application needs higher thrust from a bigger bore; the cross-roller guide suits the most demanding precision and rigidity requirements. The 150mm stroke is selected within the bore's table, and the BF adjuster specifies a shock absorber on the retraction side only. Thread is PT.
Applications
Precision Pick-and-Place
Cross-roller guidance with a retraction-side shock absorber suits pick-and-place moves where the return stroke carries a load that needs controlled deceleration.
Assembly Stage Traverse
The rigid cross-roller table carries a workpiece or tool head across an assembly station with low deflection and smooth retraction-end stopping.
Small-Parts Transfer
Straight, repeatable travel transfers small parts between fixtures with the dual rod delivering reliable push force and the 150mm stroke covering longer moves.
FAQ
What does the BF adjuster code mean on HLS25X150SBF?
BF means a shock absorber is fitted on the retraction side only, leaving the extension end with a bumper. This is useful when the return stroke carries the heavier load. B-type adjusters are available on bores 12 and larger, not on bore 6.
How is allowable load and moment confirmed for the HLS25X150SBF?
Allowable load, moment and kinetic energy are published as tables and deflection curves in the datasheet. We confirm the values for your specific bore and stroke from the published Wmax, Emax and moment tables on request.