Airtac HLS Precision Slide Cylinder HLS25X30SA
The AirTAC Airtac HLS Precision Slide Cylinder HLS25X30SA is a genuine HLS slide-table cylinder, 25 mm bore: a double-acting dual-rod air cylinder integrated with a cross-roller guide so the table travels straight with high rigidity and low deflection. It delivers about 378 N of push at 0.5 MPa. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guidecross-roller guide
- Bore25 mm
- Push thrust @0.5 MPa378 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLS Precision Slide Cylinder HLS25X30SA
The HLS25X30SA is a double-acting dual-rod slide-table cylinder that pairs a cross-roller linear guide with an air cylinder, so the moving table travels straight with high rigidity and minimal deflection. The 25 mm bore delivers higher thrust over a 30 mm guided stroke, and the dual rod doubles output force while a floating joint protects the rod from side torque.
This is a genuine AirTAC part with a standard sintered NdFeB magnet for position sensing using CMSH, DMSH, or EMSH switches in the body slots. We confirm exact thrust, dimensions, and load-moment capacity from the published datasheet or on-page spec table on request.
Airtac HLS Precision Slide Cylinder HLS25X30SA Technical Specifications
| Model | Airtac HLS Precision Slide Cylinder HLS25X30SA |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLS (cross-roller guide) |
| Bore | 25 mm |
| Push thrust @0.5 MPa | 378 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Choose the 25 mm bore when higher thrust is needed; the cross-roller guide provides the highest precision and rigidity in the HLS family. The 30 mm stroke is within the bore 25 range. This model carries the A adjuster code, meaning adjustable rubber stoppers on both ends for fine-tuning the end-of-stroke position. Thread is PT (tapered). Route allowable load, moment, and kinetic-energy sizing to us using the published tables and deflection curves.
Applications
Pick-and-Place Head
Mounts a gripper for precise part placement where cross-roller rigidity keeps deflection minimal under payload.
Component Indexing
Indexes a component or sub-assembly between stations with a 30 mm stroke, using adjustable stoppers to fine-tune the end position.
Assembly Stopper Block
Acts as an adjustable guided stop on an assembly line, using rubber stoppers on both ends to set precise stopping positions.
FAQ
What does the A adjuster code mean on the HLS25X30SA?
A means adjustable rubber stoppers on both the extension and retraction sides, letting you fine-tune the end-of-stroke position without adding shock absorbers.
What is the maximum operating pressure for the HLS25X30SA?
Maximum working pressure is 0.7 MPa (100 psi). Operating range for bore 25 is 0.15 to 0.7 MPa (22 to 100 psi). We confirm allowable load and moment from the published datasheet on request.