Airtac HLS Precision Slide Cylinder HLS25X30SBS
The AirTAC Airtac HLS Precision Slide Cylinder HLS25X30SBS is a genuine HLS slide-table cylinder, 25 mm bore: a double-acting dual-rod air cylinder integrated with a cross-roller guide so the table travels straight with high rigidity and low deflection. It delivers about 378 N of push at 0.5 MPa. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guidecross-roller guide
- Bore25 mm
- Push thrust @0.5 MPa378 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLS Precision Slide Cylinder HLS25X30SBS
The HLS25X30SBS is a double-acting dual-rod slide-table cylinder pairing an air cylinder with a cross-roller linear guide, so the moving table follows a precise straight path with high rigidity and minimal deflection. The 25 mm bore and 30 mm stroke provide higher thrust for heavier guided loads, and the floating joint protects the rods from side torque. The BS adjuster places a shock absorber on the extension side to absorb end-of-stroke impact when the load moves outward.
This is a genuine AirTAC HLS cross-roller slide table. A magnet is standard for position sensing with CMSH, DMSH or EMSH series switches that mount in the body slots. We confirm the exact thrust, dimensions, allowable load and moment values from the AirTAC datasheet or on-page spec table on request.
Airtac HLS Precision Slide Cylinder HLS25X30SBS Technical Specifications
| Model | Airtac HLS Precision Slide Cylinder HLS25X30SBS |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLS (cross-roller guide) |
| Bore | 25 mm |
| Push thrust @0.5 MPa | 378 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Choose the 25 mm bore when higher thrust is needed in a guided slide; a larger bore produces more push at the same pressure, while the cross-roller guide maintains low deflection under offset loads. Pick the 30 mm stroke from the bore's published stroke table. The BS adjuster adds a shock absorber on the extension stroke - select it when the outward-moving mass is large and bumper cushioning is insufficient. Thread is PT (tapered). Route load and moment sizing to us; AirTAC publishes Wmax, Emax and moment values as tables and deflection curves.
Applications
Pick-and-Place Traverse
Positions a gripper along a 30 mm stroke with cross-roller precision, with shock absorption on the extension end for smooth part release.
Stopper Slide
Extends a stopper pin into a part flow line with shock-absorber cushioning to halt workpieces gently at the extension end.
Gripper Traverse
Moves a gripper between two pick positions on a rigid cross-roller guide where repeatable positioning is critical.
FAQ
What does the BS adjuster code mean on this HLS25 model?
BS indicates a shock absorber fitted on the extension side. The basic HLS uses a rubber bumper at both ends; BS upgrades the extension end to a shock absorber for heavier moving masses. The retraction side keeps the standard bumper.
What speed range and meter-out control applies to the HLS25?
The standard speed range is 50 to 500 mm/s. Use a meter-out flow control to keep speed within this range. Exceeding 500 mm/s risks damage to the guide and bumper; the shock absorber on the extension side helps manage higher moving-mass energy.