Airtac HLS Precision Slide Cylinder HLS25X40SA
The AirTAC Airtac HLS Precision Slide Cylinder HLS25X40SA is a genuine HLS slide-table cylinder, 25 mm bore: a double-acting dual-rod air cylinder integrated with a cross-roller guide so the table travels straight with high rigidity and low deflection. It delivers about 378 N of push at 0.5 MPa. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guidecross-roller guide
- Bore25 mm
- Push thrust @0.5 MPa378 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLS Precision Slide Cylinder HLS25X40SA
The HLS25X40SA is an AirTAC cross-roller guided slide-table cylinder with a 25mm bore and 40mm stroke. A linear cross-roller guide is integrated with a dual-rod, double-acting air cylinder so the moving table travels in a straight line with low deflection. The cross-roller guide delivers high rigidity and precision for demanding loads, and the floating joint protects the rod from side torque. Dual rods double the thrust compared to a single-rod cylinder of the same bore.
This is a genuine AirTAC part fitted with a standard magnet for position sensing. Compatible sensor switches include the CMSH, DMSH, and EMSH series, which seat in the magnetic-switch slots on the cylinder body. We confirm exact thrust, dimensions, allowable load, and moment from the manufacturer datasheet or on-page specification table on request.
Airtac HLS Precision Slide Cylinder HLS25X40SA Technical Specifications
| Model | Airtac HLS Precision Slide Cylinder HLS25X40SA |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLS (cross-roller guide) |
| Bore | 25 mm |
| Push thrust @0.5 MPa | 378 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Choose the 25mm bore for higher thrust in a compact guided-slide footprint. The HLS cross-roller guide suits applications needing maximum rigidity and load capacity; HLQ ball-bearing guides offer anti-rust dust-proof operation, HLH provides precision-assembly straightness with three port groups, and HLF reduces overall height. Select stroke within the bore's datasheet stroke table. This model includes adjustable rubber stoppers on both ends (adjuster code A). Thread is PT with a 1/8" port. For load and moment sizing, we reference the published Wmax, Emax, and moment tables and deflection curves.
Applications
Pick-and-Place Head
Cross-roller rigidity keeps a pick-and-place head aligned during rapid transfers with minimal deflection at the tool tip.
Small-Parts Transfer
Stops and pushes small components between conveyor stations with repeatable positioning across the 40mm stroke.
Assembly Stage Slide
Presents a workpiece to a press or joining station with the 25mm bore providing higher thrust for firm clamping.
FAQ
What does the A adjuster code mean on HLS25X40SA?
The A code specifies adjustable rubber stoppers at both ends of the slide table, giving bumper cushioning that can be fine-tuned at each end of the stroke. Other options are B for shock absorbers, or AS, AF, BS, BF for single-side configurations. B-type shock absorbers are not available on bore 6.
What is the maximum operating pressure for the HLS25?
The maximum working pressure is 0.7 MPa (100 psi). For the 25mm bore the operating range is 0.15-0.7 MPa (22-100 psi). Use meter-out speed control at 50-500 mm/s and filtered air to 40 um. We confirm allowable load and moment from the published datasheet tables on request.