Airtac HLS Precision Slide Cylinder HLS25X40SBS
The AirTAC Airtac HLS Precision Slide Cylinder HLS25X40SBS is a genuine HLS slide-table cylinder, 25 mm bore: a double-acting dual-rod air cylinder integrated with a cross-roller guide so the table travels straight with high rigidity and low deflection. It delivers about 378 N of push at 0.5 MPa. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guidecross-roller guide
- Bore25 mm
- Push thrust @0.5 MPa378 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLS Precision Slide Cylinder HLS25X40SBS
The AirTAC HLS25X40SBS is a double-acting dual-rod slide-table cylinder that integrates an air cylinder with a cross-roller linear guide, so the moving table travels straight with high precision and rigidity. The dual rod doubles thrust for the bore 25 size, and the floating joint spares the rod from side torque. The BS adjuster adds a shock absorber on the extension side only, cushioning the push-out end of stroke.
This is a genuine AirTAC part with a standard magnet for position sensing; compatible sensor switches are CMSH, DMSH, or EMSH fitted to the body slots. We confirm thrust, dimensions, and load-moment ratings from the datasheet or on-page table on request.
Airtac HLS Precision Slide Cylinder HLS25X40SBS Technical Specifications
| Model | Airtac HLS Precision Slide Cylinder HLS25X40SBS |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLS (cross-roller guide) |
| Bore | 25 mm |
| Push thrust @0.5 MPa | 378 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Bore 25 is the largest in the HLS cross-roller range, delivering the highest thrust in the family for heavier guided loads. Choose the HLS cross-roller guide when precision, rigidity, and low deflection matter most; pick HLQ ball-bearing for anti-rust dust-proof service, HLH miniature roller-ball for ultra-precise straightness, or HLF for reduced height. Stroke 40 mm falls within the bore 25 range. The BS adjuster places a shock absorber on the extension side only (not available on bore 6); for both ends choose B, for retraction-only choose BF. Thread is PT; request G or NPT if needed. Route allowable load, moment, and kinetic-energy sizing to us - these are published as tables and deflection curves.
Applications
Extend-Stop Ejection
Ejects a finished part on a 40 mm extension where the BS shock absorber cushions the push-out stop for clean release.
Loading Transfer
Pushes a component onto a conveyor at full extension; cross-roller rigidity and the bore 25 dual-rod thrust keep the push straight.
Indexing Pusher
Indexes a pallet one position on extension; the shock absorber decelerates the push so the pallet settles without bounce.
FAQ
What does BS mean in HLS25X40SBS?
BS places a shock absorber on the extension side only, cushioning the push-out end of stroke. The retraction end uses a standard bumper. B-type adjusters (B, BS, BF) are not offered on bore 6.
Is the magnet optional on this slide table?
No. The magnet is standard on the entire HLS line; you cannot decline it. Position sensing uses CMSH, DMSH, or EMSH switches fitted to the magnetic-switch slots on the body.