Airtac HLS Precision Slide Cylinder HLS25X50S
The AirTAC Airtac HLS Precision Slide Cylinder HLS25X50S is a genuine HLS slide-table cylinder, 25 mm bore: a double-acting dual-rod air cylinder integrated with a cross-roller guide so the table travels straight with high rigidity and low deflection. It delivers about 378 N of push at 0.5 MPa. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guidecross-roller guide
- Bore25 mm
- Push thrust @0.5 MPa378 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLS Precision Slide Cylinder HLS25X50S
The HLS25X50S is a genuine AirTAC cross-roller slide-table cylinder with a 25 mm bore and 50 mm stroke. It integrates a dual-rod air cylinder with a precision cross-roller linear guide so the table travels straight with minimal deflection. The floating joint protects the rods from side torque, and the dual-rod design doubles the thrust for a compact footprint. At 25 mm bore this model delivers higher thrust suited to heavier guided loads.
This unit ships magnet-fitted as standard, with magnetic-switch slots on the body for CMSH, DMSH or EMSH sensors. The basic bumper cushion handles end-of-stroke impact. Ports are 1/8" PT. We confirm exact thrust, dimensions, allowable load and moment from the AirTAC datasheet or the on-page spec table on request.
Airtac HLS Precision Slide Cylinder HLS25X50S Technical Specifications
| Model | Airtac HLS Precision Slide Cylinder HLS25X50S |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLS (cross-roller guide) |
| Bore | 25 mm |
| Push thrust @0.5 MPa | 378 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Choose the 25 mm bore when your application needs higher thrust from the cross-roller guide family; a larger bore delivers more push and pull than smaller HLS bores. Select the 50 mm stroke within the bore's published stroke range. The HLS cross-roller guide suits applications needing maximum rigidity and precision - compare with the HLQ ball-bearing guide when anti-rust or dust-proof operation is a priority. This model uses the standard bumper cushion with PT ports. For load and moment sizing, we reference the published Wmax, Emax and moment tables and deflection curves.
Applications
Pick-and-Place Head
Precise cross-roller guidance positions a vacuum gripper accurately for component placement on a PCB assembly line.
Small-Parts Transfer
The dual-rod slide shuttles small machined parts between machining stations with straight, low-deflection travel.
Assembly Stage Slide
High-rigidity cross-roller table carries a pressing head or fastening tool across a 50 mm stroke for repeatable assembly operations.
FAQ
Is the magnet optional on the HLS25X50S?
No. Every HLS slide table in this line is magnet-fitted as standard. The body has magnetic-switch slots for CMSH, DMSH or EMSH sensors - you add the switch but the magnet is always present.
What is the maximum working pressure for this model?
The maximum operating pressure is 0.7 MPa (100 psi) for the 25 mm bore, with a proof pressure of 1.2 MPa (175 psi). The operating range for bore 25 is 0.15-0.7 MPa. We confirm allowable load and moment from the datasheet.