Airtac HLS Precision Slide Cylinder HLS25X75SA
The AirTAC Airtac HLS Precision Slide Cylinder HLS25X75SA is a genuine HLS slide-table cylinder, 25 mm bore: a double-acting dual-rod air cylinder integrated with a cross-roller guide so the table travels straight with high rigidity and low deflection. It delivers about 378 N of push at 0.5 MPa. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guidecross-roller guide
- Bore25 mm
- Push thrust @0.5 MPa378 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLS Precision Slide Cylinder HLS25X75SA
The AirTAC HLS25X75SA is a double-acting dual-rod slide-table cylinder with an integrated cross-roller linear guide. Its 25 mm bore and 75 mm stroke provide higher thrust over an extended travel distance. The cross-roller guide ensures exceptional rigidity and minimal deflection, while the dual-rod design doubles thrust. A floating joint protects the rods from side torque for precise, repeatable linear motion.
This genuine AirTAC component carries a standard magnet for position sensing. CMSH, DMSH, and EMSH sensor switches install in the magnetic-switch slots on the body. We confirm thrust values, dimensions, and allowable load and moment from the manufacturer datasheet or on-page spec table on request.
Airtac HLS Precision Slide Cylinder HLS25X75SA Technical Specifications
| Model | Airtac HLS Precision Slide Cylinder HLS25X75SA |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLS (cross-roller guide) |
| Bore | 25 mm |
| Push thrust @0.5 MPa | 378 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
The 25 mm bore delivers higher thrust for force-critical applications - increase bore size for more push, and check the spec table for the verified thrust figure. The HLS cross-roller guide is the most rigid and precise option in the HL family, recommended for tasks with significant side loads. The AS adjuster code adds an adjustable rubber stopper on the extension side for fine end-position tuning. The 75 mm stroke must be within the bore 25 range from the datasheet. Thread is PT. Contact us to confirm load, moment, and kinetic energy from published tables and curves.
Applications
Adjustable Stop Position
The extension-side rubber stopper allows fine-tuning of the forward end position for precise part registration in assembly fixtures.
Precision Indexing
Cross-roller guidance provides accurate indexing of workpieces with low deflection under load during multi-step manufacturing operations.
Tooling Carrier
Carries end-of-arm tooling along a guided 75 mm path with high rigidity and repeatable positioning for automated processes.
FAQ
What does the AS adjuster code mean on this model?
AS indicates an adjustable rubber stopper on the extension (forward) side. It lets you fine-tune the forward end position without changing the stroke. The retraction side uses the standard bumper cushion.
Is the magnet optional on this HLS slide table?
No, the magnet is standard on the entire HLS series. Position sensing uses CMSH, DMSH, or EMSH sensor switches that mount in the body slots. You cannot order this model without a magnet.