Airtac HLS Precision Slide Cylinder HLS25X75SBF
The AirTAC Airtac HLS Precision Slide Cylinder HLS25X75SBF is a genuine HLS slide-table cylinder, 25 mm bore: a double-acting dual-rod air cylinder integrated with a cross-roller guide so the table travels straight with high rigidity and low deflection. It delivers about 378 N of push at 0.5 MPa. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guidecross-roller guide
- Bore25 mm
- Push thrust @0.5 MPa378 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLS Precision Slide Cylinder HLS25X75SBF
The AirTAC HLS25X75SBF is a double-acting dual-rod slide-table cylinder that integrates a cross-roller linear guide with a pneumatic cylinder. The cross-roller guide delivers high precision, rigidity, and low deflection under load, while the dual rod doubles thrust and a floating joint protects the rod from side torque. At bore 25mm and stroke 75mm, this model provides higher thrust for heavier guided travel tasks. The BF adjuster code equips the retraction side with a shock absorber to cushion end-of-stroke impact.
This is a genuine AirTAC part with a standard magnet for position sensing; compatible sensor switches include CMSH, DMSH, and EMSH series mounted in the body's magnetic-switch slots. We confirm exact thrust, dimensions, allowable load, and moment values from the AirTAC datasheet or the on-page specification table on request.
Airtac HLS Precision Slide Cylinder HLS25X75SBF Technical Specifications
| Model | Airtac HLS Precision Slide Cylinder HLS25X75SBF |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLS (cross-roller guide) |
| Bore | 25 mm |
| Push thrust @0.5 MPa | 378 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Choose bore 25 when your application needs higher thrust from the HLS cross-roller family; a larger bore means more push, with the exact value shown in the spec table. The cross-roller guide suits applications requiring maximum rigidity and precision over ball-bearing (HLQ) or miniature roller-ball (HLH) alternatives. Stroke 75mm falls within the bore-25 stroke range. The BF adjuster places a shock absorber on the retraction side for controlled end-stop cushioning; thread is PT. Contact us to confirm allowable load and moment from published tables and deflection curves.
Applications
Pick-and-Place Head
Mounts a gripper for precise component placement with cross-roller rigidity at 75mm stroke.
Parts Transfer Stop
Transfers or stops heavier workpieces on a conveyor with shock-absorber cushioning at retraction.
Assembly Stage Push
Positions parts against a fixture for assembly with high rigidity and repeatable end-of-stroke accuracy.
FAQ
What does the BF adjuster code mean on this HLS model?
BF indicates a shock absorber fitted on the retraction side. The B prefix denotes shock-absorber cushioning (versus A for adjustable rubber stopper), and F specifies the retraction side. Shock absorbers are available on bore sizes above 6mm.
What is the maximum operating pressure for the HLS25?
Maximum working pressure is 0.7 MPa (100 psi). Operating range for bore 25 is 0.15-0.7 MPa (22-100 psi). Meter-out speed control keeps travel at or below 500 mm/s.