Airtac HLS Precision Slide Cylinder HLS6X10S
The AirTAC Airtac HLS Precision Slide Cylinder HLS6X10S is a genuine HLS slide-table cylinder, 6 mm bore: a double-acting dual-rod air cylinder integrated with a cross-roller guide so the table travels straight with high rigidity and low deflection. It delivers about 21 N of push at 0.5 MPa. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guidecross-roller guide
- Bore6 mm
- Push thrust @0.5 MPa21 N
- Operating pressure0.2 - 0.7 MPa (29 - 100 psi)
- Port sizeM5x0.8
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLS Precision Slide Cylinder HLS6X10S
The AirTAC HLS6X10S is a double-acting dual-rod slide-table cylinder that integrates a cross-roller linear guide with a pneumatic cylinder. The cross-roller guide delivers high precision, rigidity, and low deflection, while the dual rod doubles thrust and a floating joint protects the rod from side torque. At bore 6mm and stroke 10mm, this compact model provides light thrust for small-part guided travel. The basic adjuster uses standard bumper cushioning at both ends.
This is a genuine AirTAC part with a standard magnet for position sensing; compatible sensor switches include CMSH, DMSH, and EMSH series mounted in the body's magnetic-switch slots. We confirm exact thrust, dimensions, allowable load, and moment values from the AirTAC datasheet or the on-page specification table on request.
Airtac HLS Precision Slide Cylinder HLS6X10S Technical Specifications
| Model | Airtac HLS Precision Slide Cylinder HLS6X10S |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLS (cross-roller guide) |
| Bore | 6 mm |
| Push thrust @0.5 MPa | 21 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.2 - 0.7 MPa (29 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Choose bore 6 for compact, light-thrust applications where the HLS cross-roller guide's precision and rigidity are needed in a small envelope. The cross-roller guide offers maximum rigidity compared to ball-bearing (HLQ) or miniature roller-ball (HLH) alternatives. Stroke 10mm is within the bore-6 stroke range. This model uses basic bumper cushioning with no shock-absorber option at bore 6 and PT thread. Contact us to confirm allowable load and moment from published tables and deflection curves.
Applications
Small-Parts Pick
Mounts a mini-gripper for precise pickup of electronic components with cross-roller repeatability.
Micro Transfer
Shifts small parts 10mm between stations with guided straightness and minimal deflection.
Gripper Traverse
Positions a small gripper assembly with compact bore 6 footprint and cross-roller precision.
FAQ
Why does the HLS6X10S not offer a shock-absorber option?
Bore 6 does not support B-type shock absorber adjusters; only the basic bumper cushioning or A-type adjustable rubber stoppers are available. Shock absorbers require bore sizes 8mm and above.
What pressure range applies to the bore 6 HLS cylinder?
Operating pressure for bore 6 is 0.2-0.7 MPa (29-100 psi). Maximum working pressure is 0.7 MPa. Keep meter-out speed control within 50-500 mm/s for stable guided travel.