Airtac HLS Precision Slide Cylinder HLS6X10SA
The AirTAC Airtac HLS Precision Slide Cylinder HLS6X10SA is a genuine HLS slide-table cylinder, 6 mm bore: a double-acting dual-rod air cylinder integrated with a cross-roller guide so the table travels straight with high rigidity and low deflection. It delivers about 21 N of push at 0.5 MPa. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guidecross-roller guide
- Bore6 mm
- Push thrust @0.5 MPa21 N
- Operating pressure0.2 - 0.7 MPa (29 - 100 psi)
- Port sizeM5x0.8
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLS Precision Slide Cylinder HLS6X10SA
The HLS6X10SA is a double-acting dual-rod slide-table cylinder that integrates an air cylinder with a cross-roller linear guide, so the moving table travels straight with minimal deflection. The cross-roller guide delivers the highest precision and rigidity in the HLS family, and at a 6 mm bore this unit provides light thrust suitable for compact actuation tasks. The dual rod doubles the thrust while a floating joint spares the rods from side torque. The A adjuster code means adjustable rubber stoppers are fitted at both ends of the stroke.
This is a genuine AirTAC part. A magnet is standard for position sensing, and the body carries magnetic-switch slots compatible with CMSH, DMSH, and EMSH sensor switches. We confirm the exact thrust, dimensions, and allowable load/moment values from the datasheet or on-page spec table on request.
Airtac HLS Precision Slide Cylinder HLS6X10SA Technical Specifications
| Model | Airtac HLS Precision Slide Cylinder HLS6X10SA |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLS (cross-roller guide) |
| Bore | 6 mm |
| Push thrust @0.5 MPa | 21 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.2 - 0.7 MPa (29 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
A 6 mm bore keeps the footprint small and provides light thrust; choose a larger bore if your application needs more push force. The HLS cross-roller guide is selected when maximum precision, rigidity, and load capacity matter more than cost. Stroke must be chosen within the bore 6 stroke range listed in the datasheet. This model carries the A adjuster (adjustable rubber stopper at both ends); B-type shock absorbers are not available on bore 6. Thread is PT standard; request G or NPT if needed. Route load and moment sizing to us so we can cross-check the published Wmax/Emax/moment tables and deflection curves for your installation.
Applications
Precision Pick-and-Place
Cross-roller guided travel positions small electronic components accurately during automated pick-and-place cycles at 10 mm stroke.
Small-Parts Transfer
Dual-rod slide moves tiny parts between assembly stations with repeatable straight-line motion and minimal lateral deflection.
Gripper Traverse Stage
Short 10 mm stroke traverses a small gripper jaw into position for clamping or releasing delicate workpieces in a tight layout.
FAQ
What does the A in HLS6X10SA mean?
The A code indicates an adjustable rubber stopper fitted at both ends of the stroke. This lets you fine-tune the end-of-travel cushioning. B-type shock absorbers are not available on bore 6.
What is the maximum operating pressure for this bore?
Maximum working pressure is 0.7 MPa (100 psi). For bore 6 the operating range is 0.2-0.7 MPa (29-100 psi). Meter-out speed control keeps travel within 50-500 mm/s.