Airtac HLS Precision Slide Cylinder HLS6X50SA
The AirTAC Airtac HLS Precision Slide Cylinder HLS6X50SA is a genuine HLS slide-table cylinder, 6 mm bore: a double-acting dual-rod air cylinder integrated with a cross-roller guide so the table travels straight with high rigidity and low deflection. It delivers about 21 N of push at 0.5 MPa. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guidecross-roller guide
- Bore6 mm
- Push thrust @0.5 MPa21 N
- Operating pressure0.2 - 0.7 MPa (29 - 100 psi)
- Port sizeM5x0.8
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLS Precision Slide Cylinder HLS6X50SA
The HLS6X50SA is a genuine AirTAC cross-roller slide-table cylinder that integrates a double-acting dual-rod air cylinder with a high-precision linear guide. Bore 6 with 50 mm stroke keeps the footprint compact; the cross-roller guide delivers excellent rigidity and low deflection for accurate straight-line travel. A floating joint prevents side torque from loading the rods, and the dual-rod layout doubles thrust for the size.
The A adjuster adds adjustable rubber stoppers at both ends for fine end-position control beyond the standard bumper. A magnet is standard for CMSH, DMSH or EMSH sensor switches. We verify thrust, dimensions and load-moment data from the AirTAC datasheet or on-page table on request.
Airtac HLS Precision Slide Cylinder HLS6X50SA Technical Specifications
| Model | Airtac HLS Precision Slide Cylinder HLS6X50SA |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLS (cross-roller guide) |
| Bore | 6 mm |
| Push thrust @0.5 MPa | 21 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.2 - 0.7 MPa (29 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Bore 6 offers light thrust for small assemblies; step up in bore if your application needs more push while staying under the 0.7 MPa maximum. The HLS cross-roller guide is ideal when precision and rigidity are priorities. The A stoppers let you tune the stop position at both ends without swapping parts. Stroke 50 mm is within the bore 6 range; confirm load and moment from the published tables.
Thread is PT; request G or NPT if your fittings differ. Contact us for load-moment and deflection curves.
Applications
Precision Pick-and-Place
Use the adjustable rubber stoppers to dial in exact end positions for repeatable small-component placement on a 50 mm stroke.
Miniature Transfer Stage
Move lightweight parts between conveyor lanes with cross-roller straightness and tuned stop positions at both ends.
Adjustable Stopper Assembly
Serve as a compact guided stopper with field-adjustable rubber bumpers at extension and retraction ends for soft, repeatable stops.
FAQ
What does the A in HLS6X50SA mean for the end stops?
A indicates adjustable rubber stoppers at both ends, giving you field-tunable end positions in addition to the standard bumper. B-type shock absorbers are not available on bore 6.
Can I run bore 6 above 0.7 MPa?
No. Maximum working pressure is 0.7 MPa. Bore 6 operates from 0.2 to 0.7 MPa (29-100 psi). Proof pressure is 1.2 MPa for testing only.