Airtac HLS Precision Slide Cylinder HLS8X10S
The AirTAC Airtac HLS Precision Slide Cylinder HLS8X10S is a genuine HLS slide-table cylinder, 8 mm bore: a double-acting dual-rod air cylinder integrated with a cross-roller guide so the table travels straight with high rigidity and low deflection. It delivers about 38 N of push at 0.5 MPa. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guidecross-roller guide
- Bore8 mm
- Push thrust @0.5 MPa38 N
- Operating pressure0.2 - 0.7 MPa (29 - 100 psi)
- Port sizeM5x0.8
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLS Precision Slide Cylinder HLS8X10S
The AirTAC HLS8X10S is a cross-roller guided slide-table cylinder with an 8 mm bore and 10 mm stroke. Its dual-rod double-acting design integrates with a precision cross-roller linear guide for straight-line table travel with very low deflection. The dual rod doubles thrust while a floating joint protects the rod from side torque. Bore 8 provides moderate thrust for compact guided positioning, and the basic cushion uses bumpers at both ends of the short 10 mm stroke.
This is a genuine AirTAC part with a standard magnet for position sensing through CMSH, DMSH, or EMSH switches in the body slots. We confirm thrust, dimensions, and load/moment specifications from the AirTAC datasheet or on-page table on request.
Airtac HLS Precision Slide Cylinder HLS8X10S Technical Specifications
| Model | Airtac HLS Precision Slide Cylinder HLS8X10S |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLS (cross-roller guide) |
| Bore | 8 mm |
| Push thrust @0.5 MPa | 38 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.2 - 0.7 MPa (29 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Choose bore 8 when you need moderate thrust in a compact footprint with cross-roller precision and rigidity. The 10 mm stroke suits very short indexing or clamping moves. This model has basic bumper cushions; choose an A or B adjuster if you need rubber stoppers or shock absorbers at the stroke ends. Thread is PT; request G or NPT if needed. We verify allowable load and moment from published tables and deflection curves.
Applications
Assembly Stage
Indexes a workpiece 10 mm into a press or inspection station with cross-roller precision.
Short-Stroke Transfer
Shuttles small parts a brief 10 mm between adjacent tooling positions with guided travel.
Clamp Actuator
Extends a short guided clamp to hold a part in place during a machining or joining step.
FAQ
How do I choose between bore 6 and bore 8 for HLS cross-roller slide tables?
Bore 8 delivers more thrust than bore 6 while staying compact. Choose bore 6 for the lightest, smallest envelope; choose bore 8 when the load or speed requires moderate thrust. The cross-roller guide gives both bores high rigidity and low deflection.
Is the magnet optional on the HLS8X10S?
No. The magnet is standard on every HLS model and cannot be declined. It enables position sensing with CMSH, DMSH, or EMSH switches mounted in the body slots.