Airtac HLS Precision Slide Cylinder HLS8X30SBS
The AirTAC Airtac HLS Precision Slide Cylinder HLS8X30SBS is a genuine HLS slide-table cylinder, 8 mm bore: a double-acting dual-rod air cylinder integrated with a cross-roller guide so the table travels straight with high rigidity and low deflection. It delivers about 38 N of push at 0.5 MPa. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guidecross-roller guide
- Bore8 mm
- Push thrust @0.5 MPa38 N
- Operating pressure0.2 - 0.7 MPa (29 - 100 psi)
- Port sizeM5x0.8
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLS Precision Slide Cylinder HLS8X30SBS
The HLS8X30SBS is a genuine AirTAC cross-roller slide-table cylinder with an 8 mm bore and 30 mm stroke. It integrates an air cylinder with a high-precision cross-roller linear guide so the table travels straight with minimal deflection. The dual-rod design doubles the thrust compared to a single-rod unit, and a floating joint protects the rods from side torque. A shock absorber on the extension side cushions end-of-stroke impact.
This part ships with a standard magnet for position sensing; compatible sensor switches include CMSH, DMSH, and EMSH series, which fit the magnetic-switch slots on the body. We confirm exact thrust, dimensions, and allowable load/moment from the AirTAC datasheet or on-page spec table on request.
Airtac HLS Precision Slide Cylinder HLS8X30SBS Technical Specifications
| Model | Airtac HLS Precision Slide Cylinder HLS8X30SBS |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLS (cross-roller guide) |
| Bore | 8 mm |
| Push thrust @0.5 MPa | 38 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.2 - 0.7 MPa (29 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Choose a larger bore when you need more push; this 8 mm bore suits compact setups where thrust is moderate. The HLS cross-roller guide offers the highest precision and rigidity among AirTAC slide tables, making it ideal when deflection must be minimal. Pick a stroke within the bore's datasheet range. The BS adjuster places a shock absorber on the extension side for controlled deceleration at the extend end; the retract end uses a standard bumper. Thread is PT. Route load and moment sizing to us; allowable values are published as tables and deflection curves.
Applications
Pick-and-Place Head
Mounts a small gripper for precise part placement with minimal lateral deflection at the extend position.
Small-Parts Transfer
Shuttles lightweight components between stations with the cross-roller guide keeping travel straight over repeated cycles.
Assembly Stage Slide
Positions a sub-assembly fixture at the extend stop with shock-absorber cushioning for gentle contact.
FAQ
What does the BS adjuster code mean?
BS places a shock absorber on the extension side only; the retraction side uses the standard bumper cushion. This is available on HLS bore sizes 8 and above (not bore 6).
What is the maximum operating pressure for this bore?
For bore 8 the operating range is 0.2-0.7 MPa (29-100 psi); never exceed 0.7 MPa. Use meter-out speed control and keep speed within 50-500 mm/s.