Airtac HLS Precision Slide Cylinder HLS8X50SAF
The AirTAC Airtac HLS Precision Slide Cylinder HLS8X50SAF is a genuine HLS slide-table cylinder, 8 mm bore: a double-acting dual-rod air cylinder integrated with a cross-roller guide so the table travels straight with high rigidity and low deflection. It delivers about 38 N of push at 0.5 MPa. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guidecross-roller guide
- Bore8 mm
- Push thrust @0.5 MPa38 N
- Operating pressure0.2 - 0.7 MPa (29 - 100 psi)
- Port sizeM5x0.8
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLS Precision Slide Cylinder HLS8X50SAF
A slide-table cylinder pairs an air cylinder with a linear guide so the table moves in a straight path. The HLS8X50SAF features a cross-roller guide delivering high precision, rigidity, and minimal deflection; the dual-rod double-acting construction doubles thrust and a floating joint shields the rods from side torque. An adjustable rubber stopper cushions the retraction end of travel.
This is a genuine AirTAC part with a standard magnet for position sensing. Compatible sensor switches include CMSH, DMSH, and EMSH, which fit the magnetic-switch slots on the cylinder body. We verify exact thrust, dimensions, and allowable load/moment from the AirTAC datasheet or on-page spec table on request.
Airtac HLS Precision Slide Cylinder HLS8X50SAF Technical Specifications
| Model | Airtac HLS Precision Slide Cylinder HLS8X50SAF |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLS (cross-roller guide) |
| Bore | 8 mm |
| Push thrust @0.5 MPa | 38 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.2 - 0.7 MPa (29 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
The 8 mm bore is sized for light-thrust guided-slide applications; choose a larger bore for greater push force. The HLS cross-roller guide provides the top precision and rigidity among AirTAC slide tables - look at HLQ for anti-rust ball-bearing guidance, HLH for miniature roller-ball straightness with three port groups, or HLF for a reduced-height body. Stroke 50 mm must be within the bore 8 stroke range from the datasheet. This model has an adjustable rubber stopper on the retraction side (code AF) and PT thread.
We handle allowable load, moment, and kinetic-energy sizing using the published AirTAC tables and deflection curves - send your operating conditions and we pull the verified figures.
Applications
Assembly Stage Stop
Presents a workpiece at a fixed assembly position with the retraction-side rubber stopper setting a repeatable home position for each cycle.
Small-Parts Transfer
Moves lightweight parts between conveyor lanes; the cross-roller guide maintains straight travel across the full 50 mm stroke under light load.
Gripper Traverse
Shuttles a gripper between pick and release points where the dual-rod design prevents twist and the floating joint absorbs mounting misalignment.
FAQ
How does the AF adjuster differ from AS or A on the HLS slide table?
AF places an adjustable rubber stopper on the retraction end only, AS on the extension end only, and A on both ends. The base model has a standard bumper with no external stopper. Shock-absorber options (B, BS, BF) are available on bore 8 and larger but not on bore 6.
Can I run the HLS8X50SAF at 1.0 MPa?
No. Maximum working pressure is 0.7 MPa (100 psi), with proof pressure at 1.2 MPa. The bore 8 operating range is 0.2-0.7 MPa (29-100 psi). Keep speed within 50-500 mm/s using meter-out flow control. We confirm load and moment capacity from the datasheet on request.