Airtac HLS Precision Slide Cylinder HLS8X75SAF
The AirTAC Airtac HLS Precision Slide Cylinder HLS8X75SAF is a genuine HLS slide-table cylinder, 8 mm bore: a double-acting dual-rod air cylinder integrated with a cross-roller guide so the table travels straight with high rigidity and low deflection. It delivers about 38 N of push at 0.5 MPa. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guidecross-roller guide
- Bore8 mm
- Push thrust @0.5 MPa38 N
- Operating pressure0.2 - 0.7 MPa (29 - 100 psi)
- Port sizeM5x0.8
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLS Precision Slide Cylinder HLS8X75SAF
The AirTAC HLS8X75SAF slide-table cylinder combines a double-acting air cylinder with a cross-roller linear guide for accurate straight-line motion. The bore 8 dual-rod design doubles thrust while a floating joint keeps side torque off the rods. An adjustable rubber stopper on the retraction side lets you set the cushioning at the rod-in end, with a standard bumper on the extension side.
This is a genuine AirTAC component with a standard magnet for position detection. CMSH, DMSH, and EMSH sensor switches are available for the body slots. We confirm exact thrust, dimensions, and allowable load and moment from the AirTAC datasheet or on-page specification table on request.
Airtac HLS Precision Slide Cylinder HLS8X75SAF Technical Specifications
| Model | Airtac HLS Precision Slide Cylinder HLS8X75SAF |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLS (cross-roller guide) |
| Bore | 8 mm |
| Push thrust @0.5 MPa | 38 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.2 - 0.7 MPa (29 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Bore 8 gives moderate thrust in a small guided-slide package. The HLS cross-roller guide prioritizes rigidity and low deflection over the dust-proof benefits of HLQ. This AF variant places an adjustable rubber stopper on the retraction side only, with a standard bumper on extension, which suits applications where the return stroke needs gentler deceleration. The 75 mm stroke is within the bore 8 table. Ports use PT thread. We confirm load, moment, and deflection from the AirTAC published tables and curves on request.
Applications
Probe Scan Slide
Traverses a test probe across a small PCB or connector array, with a rubber stopper on the retract side for gentle return.
Carton Flap Folder
Pushes a small carton flap into fold position during packing, retracting smoothly with adjustable retraction-side cushioning.
Alignment Pusher
Squares up small parts on a fixture plate with guided extension, then retracts with controlled deceleration for cycle reliability.
FAQ
What is the AF adjuster option?
AF places an adjustable rubber stopper on the retraction side only; the extension side uses the standard bumper. This suits tasks where the return stroke needs gentler deceleration.
How do I confirm load and moment capacity?
Allowable load, moment, and deflection are published as tables and curves in the AirTAC datasheet. We confirm the specific ratings for your bore and stroke on request.