Airtac HLS Precision Slide Cylinder HLS8X75SBS
The AirTAC Airtac HLS Precision Slide Cylinder HLS8X75SBS is a genuine HLS slide-table cylinder, 8 mm bore: a double-acting dual-rod air cylinder integrated with a cross-roller guide so the table travels straight with high rigidity and low deflection. It delivers about 38 N of push at 0.5 MPa. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guidecross-roller guide
- Bore8 mm
- Push thrust @0.5 MPa38 N
- Operating pressure0.2 - 0.7 MPa (29 - 100 psi)
- Port sizeM5x0.8
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLS Precision Slide Cylinder HLS8X75SBS
The HLS8X75SBS is a double-acting dual-rod slide table cylinder that integrates an air cylinder with a cross-roller linear guide, so the moving table travels straight with high precision and rigidity. The cross-roller guide handles moderate loads with minimal deflection, and the dual rod doubles the thrust for a compact bore 8 unit. A floating joint spares the rod from side torque, extending service life.
This genuine AirTAC part comes with a standard magnet for position sensing with CMSH, DMSH, or EMSH switches mounted in the body slots. The BS adjuster provides shock absorbers on the extension side for smooth end-of-stroke deceleration. We confirm thrust, dimensions, and load-moment values from the datasheet or on-page spec table on request.
Airtac HLS Precision Slide Cylinder HLS8X75SBS Technical Specifications
| Model | Airtac HLS Precision Slide Cylinder HLS8X75SBS |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLS (cross-roller guide) |
| Bore | 8 mm |
| Push thrust @0.5 MPa | 38 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.2 - 0.7 MPa (29 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Bore 8 suits lighter-thrust applications where space is tight; choose a larger bore if you need more push. The HLS cross-roller guide offers the highest precision and rigidity among the HL sub-families, ideal when deflection must be minimal. Stroke 75 mm falls within the bore 8 range. The BS adjuster adds extension-side shock absorbers for heavier loads or higher speeds; thread is PT as standard. Route allowable load and moment sizing to us -- these are published as tables and deflection curves.
Applications
Pick-and-Place Traverse
Mount a gripper on the slide table for precise linear positioning of small electronic components during automated pick-and-place cycles.
Small-Parts Transfer
Transfer lightweight parts between conveyor stations with the cross-roller guide keeping travel straight and deflection low over the 75 mm stroke.
Gripper Mounting Slide
Use the slide as a compact gripper-mounting platform where the dual rod doubles thrust and the shock absorber cushions the extension stop.
FAQ
What does the BS adjuster code mean on the HLS8X75SBS?
BS indicates shock absorbers on the extension side only. Bore 8 supports B-type adjusters (B, BS, and BF are not available on bore 6). The shock absorber cushions the extension-side end of stroke for smoother stops at higher speeds.
What is the maximum working pressure for this cylinder?
The maximum working pressure is 0.7 MPa (100 psi). Operating pressure for bore 8 is 0.2-0.7 MPa (29-100 psi). Proof pressure is 1.2 MPa. Use meter-out speed control up to 500 mm/s.