Airtac HLSL Precision Slide Table Cylinder HLSL12X50SA
The AirTAC Airtac HLSL Precision Slide Table Cylinder HLSL12X50SA is a genuine HLS slide-table cylinder, 12 mm bore: a double-acting dual-rod air cylinder integrated with a cross-roller guide so the table travels straight with high rigidity and low deflection. It delivers about 85 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guidecross-roller guide
- Bore12 mm
- Push thrust @0.5 MPa85 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port sizeM5x0.8
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLSL Precision Slide Table Cylinder HLSL12X50SA
The HLSL12X50SA is a symmetrical cross-roller guided slide-table cylinder with adjustable rubber stoppers at both ends. AirTAC integrates a double-acting dual-rod air cylinder with a high-precision cross-roller linear guide so the moving table travels straight through the full 50 mm stroke. The dual rod doubles thrust for a compact 12 mm bore, and the floating joint prevents side torque from reaching the rods.
This is a genuine AirTAC part fitted with a standard sintered NdFeB magnet for position sensing; CMSH, DMSH and EMSH sensor switches mount in the body slots. The A adjuster adds field-adjustable rubber stoppers at both extension and retraction ends for controlled end-of-stroke contact. We confirm thrust, dimensions and load-moment data from the datasheet or on-page table on request.
Airtac HLSL Precision Slide Table Cylinder HLSL12X50SA Technical Specifications
| Model | Airtac HLSL Precision Slide Table Cylinder HLSL12X50SA |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLSL (cross-roller guide) |
| Bore | 12 mm |
| Push thrust @0.5 MPa | 85 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
The 12 mm bore suits applications needing moderate thrust in a small envelope; step up to a larger bore if you need more push. The cross-roller HLSL guide is chosen for maximum rigidity and precision - ideal where table deflection must be minimised. The A adjuster on this model provides adjustable rubber stoppers at both ends, giving you tunable end-position damping beyond the standard bumper. PT thread ports are standard; choose G or T thread variants if your fittings differ. Route load, moment and deflection verification to us using the published datasheet tables and curves.
Applications
Pick-and-Place Head
Cross-roller precision and adjustable rubber stoppers deliver controlled end-of-stroke positioning for a gripper on a 50 mm pick-and-place stroke.
Small-Parts Transfer
Transfers parts between conveyor lanes with repeatable guided travel and tunable stopper contact at both travel ends.
Stopper Mechanism
Acts as a precise adjustable stopper for incoming workpieces, with the rubber stopper absorbing end-of-stroke impact at both ends.
FAQ
What does the A adjuster mean on the HLSL12X50SA?
The A code indicates adjustable rubber stoppers fitted at both the extension and retraction ends. You can tune the stopper position in the field to control end-of-stroke contact. This is distinct from the B code, which uses shock absorbers instead of rubber, and from the basic model with no adjuster.
Can I run the HLSL12X50SA at 1.0 MPa?
No. The maximum working pressure is 0.7 MPa (100 psi). For the 12 mm bore the operating range is 0.15-0.7 MPa (22-100 psi). Proof pressure of 1.2 MPa (175 psi) is for factory qualification only, not continuous operation. Speed should be kept within 50-500 mm/s with proper meter-out flow control.