Airtac HLSL Precision Slide Table Cylinder HLSL12X75SAS
The AirTAC Airtac HLSL Precision Slide Table Cylinder HLSL12X75SAS is a genuine HLS slide-table cylinder, 12 mm bore: a double-acting dual-rod air cylinder integrated with a cross-roller guide so the table travels straight with high rigidity and low deflection. It delivers about 85 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guidecross-roller guide
- Bore12 mm
- Push thrust @0.5 MPa85 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port sizeM5x0.8
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLSL Precision Slide Table Cylinder HLSL12X75SAS
The AirTAC HLSL12X75SAS is a symmetrical cross-roller slide-table cylinder with a 12 mm bore and 75 mm stroke. The cross-roller linear guide provides high rigidity and precise straight-line travel with low deflection, while the dual rods double thrust and a floating joint isolates them from side torque. A 12 mm bore suits compact guided applications needing moderate force.
This is a genuine AirTAC part. A magnet is standard, and magnetic-switch slots on the body accept CMSH, DMSH, or EMSH sensors. The AS code places an adjustable rubber stopper on the extension side only. We confirm exact thrust, dimensions, and allowable load and moment from the published datasheet or on-page specification table on request.
Airtac HLSL Precision Slide Table Cylinder HLSL12X75SAS Technical Specifications
| Model | Airtac HLSL Precision Slide Table Cylinder HLSL12X75SAS |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLSL (cross-roller guide) |
| Bore | 12 mm |
| Push thrust @0.5 MPa | 85 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Choose a 12 mm bore for moderate thrust; step up to 16 or 20 mm if your application needs more push or pull force. The HLS cross-roller guide delivers the best rigidity and load capacity in the HL family, suited to tasks demanding minimal table deflection. Stroke 75 mm is within the bore 12 range. The AS adjuster fits a rubber stopper on the extension end; use AF for the retraction end, A for both, or B for shock absorbers at both ends. Thread is PT; request G for BSPP or T for NPT.
Allowable load, moment, and kinetic energy depend on bore and stroke and are published as tables and deflection curves. Contact us to verify the model meets your load and moment requirements.
Applications
Gripper Traverse
Carries a gripper across a 75 mm extension stroke with the cross-roller guide maintaining grip alignment and the extension-side rubber stopper setting a precise forward limit.
Small-Parts Transfer
Transfers delicate parts between processing stations with the symmetrical body allowing centered mounting and the cross-roller guide keeping travel precise.
Assembly Stage Positioning
Positions a workpiece at an assembly station where the extension-side rubber stopper provides a cushioned, adjustable end stop for repeatable placement.
FAQ
What does the AS adjuster code mean on HLSL12X75SAS?
AS means an adjustable rubber stopper on the extension side only; the retraction side uses the basic bumper. For rubber stoppers on both ends choose A, for shock absorbers choose B, BS, or BF.
What speed range can the HLSL12 achieve?
Operating speed is 50 to 500 mm/s. Use meter-out speed control to keep the slide within this range. Exceeding 500 mm/s risks damaging the bumper and guide.