Airtac HLSL Precision Slide Table Cylinder HLSL16X100S
The AirTAC Airtac HLSL Precision Slide Table Cylinder HLSL16X100S is a genuine HLS slide-table cylinder, 16 mm bore: a double-acting dual-rod air cylinder integrated with a cross-roller guide so the table travels straight with high rigidity and low deflection. It delivers about 151 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guidecross-roller guide
- Bore16 mm
- Push thrust @0.5 MPa151 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port sizeM5x0.8
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLSL Precision Slide Table Cylinder HLSL16X100S
A slide-table cylinder integrates an air cylinder and linear guide so the table moves in a straight line. The HLSL16X100S is a symmetrical cross-roller dual-rod slide table with bore 16 mm and 100 mm stroke. The cross-roller guide offers the highest precision and rigidity among HL sub-families, with very low deflection. Dual rods double the thrust for a bigger bore, and the floating joint prevents side torque from reaching the rods.
This is a genuine AirTAC part. A magnet is standard, and sensor switches CMSH, DMSH, or EMSH install in the body slots. We confirm exact thrust, dimensions, and load and moment ratings from the AirTAC datasheet or on-page spec table on request.
Airtac HLSL Precision Slide Table Cylinder HLSL16X100S Technical Specifications
| Model | Airtac HLSL Precision Slide Table Cylinder HLSL16X100S |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLSL (cross-roller guide) |
| Bore | 16 mm |
| Push thrust @0.5 MPa | 151 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Bore size sets the thrust: the 16 mm bore gives higher thrust than the 6 or 8 mm bores. Choose the HLS cross-roller guide when your application demands maximum precision and rigidity. The 100 mm stroke must be within the bore 16 stroke table. This model uses the basic bumper cushion at both ends with no optional adjuster. Thread is PT. For allowable load, moment, and kinetic energy sizing, we supply values from the published Wmax, Emax, and moment tables or deflection curves.
Applications
Pick-and-place head
Mounts a gripper for precise component placement over the 100 mm travel with cross-roller straightness.
Indexing stage
Indexes a workpiece between two positions with repeatable accuracy under moderate load.
Assembly shuttle
Shuttles a sub-assembly between workstations with the symmetrical body balancing the load across 100 mm.
FAQ
Does this model include a shock absorber?
No. HLSL16X100S uses the basic bumper cushion at both ends. For shock absorbers, look for models coded B, BS, or BF in the adjuster position. B-type adjusters are not available on bore 6.
How do I confirm the allowable load and moment?
We confirm allowable load, moment, and kinetic energy from the AirTAC published Wmax, Emax, and moment tables, plus deflection curves, on request. The maximum working pressure is 0.7 MPa and the bore 16 operating range is 0.15-0.7 MPa.