Airtac HLSL Precision Slide Table Cylinder HLSL16X100SA
The AirTAC Airtac HLSL Precision Slide Table Cylinder HLSL16X100SA is a genuine HLS slide-table cylinder, 16 mm bore: a double-acting dual-rod air cylinder integrated with a cross-roller guide so the table travels straight with high rigidity and low deflection. It delivers about 151 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guidecross-roller guide
- Bore16 mm
- Push thrust @0.5 MPa151 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port sizeM5x0.8
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLSL Precision Slide Table Cylinder HLSL16X100SA
A slide-table cylinder integrates an air cylinder with a linear guide so the moving table travels in a straight line. The HLSL symmetrical cross-roller guide delivers high precision and rigidity with low deflection, and the dual rod doubles the thrust for bore 16 at a 100 mm stroke. A floating joint spares the rod from side torque so the guide carries the lateral load.
This is a genuine AirTAC part with a standard magnet for position sensing. Compatible sensor switches are CMSH, DMSH, and EMSH, fitting magnetic-switch slots on the body. We confirm thrust, dimensions, and load-moment from the datasheet or on-page table on request.
Airtac HLSL Precision Slide Table Cylinder HLSL16X100SA Technical Specifications
| Model | Airtac HLSL Precision Slide Table Cylinder HLSL16X100SA |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLSL (cross-roller guide) |
| Bore | 16 mm |
| Push thrust @0.5 MPa | 151 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Bore 16 provides moderate thrust suited to mid-range guided tasks; pick a larger bore if you need more push. The HLSL cross-roller guide offers the highest precision and rigidity in the HLS family, with a symmetrical body for balanced mounting. Stroke 100 stays within the bore 16 range. The A adjuster adds an adjustable rubber stopper at both ends for controlled end-of-stroke positioning. Thread is PT. Route load and moment sizing to us, as allowable values are published as tables and deflection curves.
Applications
Assembly Stage Traverse
Moves a sub-assembly pallet into position under a press or test head with repeatable straight-line accuracy and dual-rod thrust.
Small-Parts Transfer
Transfers small components between conveyor lanes with precise lateral guided travel and balanced symmetrical mounting.
Gripper Traverse
Carries an end-effector or gripper across a 100 mm stroke for pick-and-place operations requiring low deflection.
FAQ
What does the A adjuster code mean on HLSL16X100SA?
The A code specifies an adjustable rubber stopper at both extension and retraction ends, giving you tunable end-of-stroke cushioning without a shock absorber.
What is the maximum working pressure for this model?
Maximum working pressure is 0.7 MPa (100 psi). Operating pressure for bore 16 is 0.15-0.7 MPa (22-100 psi). Never exceed 0.7 MPa.