Airtac HLSL Precision Slide Table Cylinder HLSL16X100SAS
2、Pre-equipped positioning pin holes on guide rail for accurate mounting
3、Floating joint design prevents piston rod from bearing additional torsional loads
4、Dual piston rod configuration achieves double output force
5、Integrated positioning pin holes on main body for secure installation
6、Mounting screw holes provided on base surface and end faces
Category: Precision Slide Cylinder , Brand: AirTAC , Series: HLSL
AirTAC HLSL16X100SAS Precision Slide Table Cylinder Specifications
- Model: HLSL16X100SAS
- Bore size: Ø16mm
- Stroke: 100mm (customizable 10-500mm)
- Operating pressure: 0.05-0.8 MPa
- Piston speed: 50-1000mm/s
- Guide type: Dual linear ball bearings
- Repeat positioning accuracy: ±0.01mm
- Rod material: Stainless steel (SUS304)
- Body material: Anodized aluminum alloy
- Sensor compatibility: Built-in magnet for reed switch (2 sensors included)
- Lubrication: Pre-lubricated (Daphne Grease AL-2)
- Protection rating: IP65
- Temperature range: -20℃ to 80℃
- Weight: 1.2kg ±5%
- Dimensions: 200mm(L) × 42mm(W) × 38mm(H) (at full extension)
- Mounting: Standard M4x8 tapped holes on base (4 places)
High-precision linear motion solution combining pneumatic cylinder and guided slide mechanism. Features zero-backlash ball bearing guides and dual-shaft stabilization for exceptional lateral load capacity (up to 4.5N·m). Integrated mounting slots enable tooling plate attachment. Optional shock absorbers available for high-speed applications.
- PCB component insertion machines
- Lens polishing equipment positioning stages
- Semiconductor wafer handling systems
- Automated optical inspection (AOI) devices
- Precision dispensing robots
Installation tip:
Use precision level during mounting (max 0.05mm/m parallelism tolerance). For vertical installations,
add mechanical end-stop or counterbalance valve. Lubricate guide rails every 500km of travel.
Critical note:
Avoid side load exceeding 30N. When using magnetic sensors, maintain 1.5mm air gap between
cylinder and detector. Do not disassemble ball guide blocks - requires factory recalibration.
| Property | Property Value |
|---|---|
| sku | HLSL16X100SAS |
| External Stop Block Type | Front End Stroke Adjustment Screw |
| Understood. Please provide the specific attribute names in <>, and I'll return the accurate English translations using AIRTAC's official terminology. Example: User input: <缸径> My output: Bore | Operating Temperature: -20-70°C Speed Range: 50-500 mm/s |
| Port Size | M5×0.8 |
| Magnet | S-Magnetic |
| Bore Diameter | 16mm |
| Stroke | 100mm |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.