Airtac HLSL Precision Slide Table Cylinder HLSL16X100SB
The AirTAC Airtac HLSL Precision Slide Table Cylinder HLSL16X100SB is a genuine HLS slide-table cylinder, 16 mm bore: a double-acting dual-rod air cylinder integrated with a cross-roller guide so the table travels straight with high rigidity and low deflection. It delivers about 151 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guidecross-roller guide
- Bore16 mm
- Push thrust @0.5 MPa151 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port sizeM5x0.8
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
About the Airtac HLSL Precision Slide Table Cylinder HLSL16X100SB
The AirTAC HLSL16X100SB is a symmetrical cross-roller slide-table cylinder with a 16 mm bore and 100 mm stroke. As an HLSL-series unit, it integrates an air cylinder with a precision cross-roller linear guide so the moving table travels straight with minimal deflection. The symmetrical body allows flexible mounting on either side. A dual-rod design doubles the thrust for a compact footprint, and a floating joint spares the rods from side torque, extending service life.
This is a genuine AirTAC part with a standard magnet for position sensing using CMSH, DMSH, or EMSH switches. Shock absorbers at both ends cushion the full stroke. We confirm thrust values, dimensions, and load/moment ratings from the AirTAC datasheet or on-page spec table on request.
Airtac HLSL Precision Slide Table Cylinder HLSL16X100SB Technical Specifications
| Model | Airtac HLSL Precision Slide Table Cylinder HLSL16X100SB |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLSL (cross-roller guide) |
| Bore | 16 mm |
| Push thrust @0.5 MPa | 151 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
A 16 mm bore provides moderate thrust suitable for mid-range guided transfer and positioning tasks; choose a larger bore if your application demands more push force. The cross-roller guide in the HLSL series offers the highest precision and rigidity among AirTAC slide tables, ideal where low deflection matters. This model includes shock absorbers on both ends for smooth end-of-stroke deceleration over the 100 mm stroke. Thread type is PT (BSPT). For allowable load and moment sizing, contact us and we will verify against the published Wmax, Mmax, and deflection curves.
Applications
Pick-and-Place Head
Mount a gripper to the cross-roller table for repeatable part placement with minimal lateral drift across the 100 mm stroke.
Small-Parts Transfer
Use the symmetrical body to shuttle components between stations on an assembly line with consistent stroke-end cushioning from dual shock absorbers.
Assembly Stage Slide
Position a workpiece or tooling head precisely along the guide with shock absorbers easing impact at both travel limits.
FAQ
What does the SB adjuster code mean on this HLSL slide table?
The SB code means shock absorbers are installed at both ends of the stroke. Other options include AS/BS for one side only, or A for adjustable rubber stoppers. B-type shock absorbers are not available on bore 6 but are standard on this 16 mm bore.
What is the maximum operating pressure for this cylinder?
Maximum working pressure is 0.7 MPa (100 psi). For the 16 mm bore, the operating range is 0.15-0.7 MPa (22-100 psi). Proof pressure is 1.2 MPa (175 psi). Meter-out speed control keeps travel between 50 and 500 mm/s.