Airtac HLSL Precision Slide Table Cylinder HLSL16X10S
The AirTAC Airtac HLSL Precision Slide Table Cylinder HLSL16X10S is a genuine HLS slide-table cylinder, 16 mm bore: a double-acting dual-rod air cylinder integrated with a cross-roller guide so the table travels straight with high rigidity and low deflection. It delivers about 151 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guidecross-roller guide
- Bore16 mm
- Push thrust @0.5 MPa151 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port sizeM5x0.8
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLSL Precision Slide Table Cylinder HLSL16X10S
A slide-table cylinder integrates an air cylinder with a linear guide so the moving table travels in a straight line. This HLSL16X10S is a symmetrical cross-roller slide table with a 16 mm bore and 10 mm stroke. The cross-roller guide delivers high precision and rigidity with minimal deflection, while the dual-rod double-acting design doubles the thrust. A floating joint protects the rod from side torque for smooth, reliable operation.
This is a genuine AirTAC part. A magnet is standard on the body, and the cylinder accepts CMSH, DMSH, and EMSH sensor switches through magnetic-switch slots. We confirm the exact thrust, dimensions, and load-moment values from the datasheet or on-page spec table on request.
Airtac HLSL Precision Slide Table Cylinder HLSL16X10S Technical Specifications
| Model | Airtac HLSL Precision Slide Table Cylinder HLSL16X10S |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLSL (cross-roller guide) |
| Bore | 16 mm |
| Push thrust @0.5 MPa | 151 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Choose a 16 mm bore when your application needs higher thrust than the smaller 6 or 8 mm bores can provide - a bigger bore delivers more push while keeping the guided precision of the cross-roller guide. The HLSL family offers the highest rigidity and precision among AirTAC slide tables, and the symmetrical body suits installations where centered mounting matters. This 10 mm stroke is ideal for very short travels. A basic bumper cushion is standard; port thread is PT. For load and moment sizing, we route you to the published Wmax, Emax, and moment tables and deflection curves.
Applications
Pick-and-Place Head
Mounts a small gripper for precise component placement on a PCB assembly line with repeatable end positioning.
Parts Transfer Stop
Indexes small workpieces between conveyor stations with accurate stopping at each end of the 10 mm stroke.
Assembly Stage Clamp
Holds a part at a defined position for a pressing or joining operation where guided rigidity is essential.
FAQ
What does the symmetrical HLSL cross-roller guide offer compared to other AirTAC slide tables?
HLSL is the symmetrical version of the HLS cross-roller slide table. The cross-roller guide provides the highest precision and rigidity in the AirTAC slide-table family, with minimal deflection under load. The symmetrical body layout suits applications where centered mounting or balanced force distribution matters.
What is the maximum operating pressure for this cylinder?
The maximum working pressure is 0.7 MPa (100 psi). For a 16 mm bore the operating range is 0.15 to 0.7 MPa (22 to 100 psi). Always filter the air supply to 40 um and keep speed within 50-500 mm/s using meter-out flow control.