Airtac HLSL Precision Slide Table Cylinder HLSL16X10SAS
The AirTAC Airtac HLSL Precision Slide Table Cylinder HLSL16X10SAS is a genuine HLS slide-table cylinder, 16 mm bore: a double-acting dual-rod air cylinder integrated with a cross-roller guide so the table travels straight with high rigidity and low deflection. It delivers about 151 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guidecross-roller guide
- Bore16 mm
- Push thrust @0.5 MPa151 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port sizeM5x0.8
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLSL Precision Slide Table Cylinder HLSL16X10SAS
The HLSL16X10SAS is a genuine AirTAC double-acting dual-rod slide-table cylinder that integrates an air cylinder with a cross-roller linear guide, so the moving table travels straight with high precision and rigidity. The cross-roller guide keeps deflection low under load, and the symmetrical body allows balanced mounting on either side. A floating joint spares the dual rods from side torque while the two rods together deliver higher thrust than a single-rod cylinder of the same bore. Bore 16 with a 10 mm stroke suits compact positioning where precise guided travel matters more than long reach. The AS adjuster adds an adjustable rubber stopper on the extension side for controlled end-of-stroke contact.
This is a genuine AirTAC part with a magnet fitted as standard, enabling position sensing with CMSH, DMSH or EMSH magnetic switches in the body slots. We confirm thrust values, overall dimensions and allowable load/moment data from the published datasheet or on-page specification table on request.
Airtac HLSL Precision Slide Table Cylinder HLSL16X10SAS Technical Specifications
| Model | Airtac HLSL Precision Slide Table Cylinder HLSL16X10SAS |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLSL (cross-roller guide) |
| Bore | 16 mm |
| Push thrust @0.5 MPa | 151 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Bore 16 provides moderate thrust for a slide table of this size; choose a larger bore if your application needs more push and a smaller bore for lighter loads. The HLS cross-roller guide is the choice when precision, rigidity and low deflection are the priority, while the HLQ ball-bearing guide suits dust-proof or anti-rust environments. The 10 mm stroke sits within the bore 16 range for short-travel positioning. The AS adjuster gives an adjustable rubber stopper on the extension side; choose B for shock absorbers on both ends or BF for the retraction side only. Thread is PT (parallel tapered); G and NPT versions are available under different model codes.
Route load, moment and kinetic-energy sizing to us. We verify against the published Wmax, Emax and deflection tables and curves so your selection is confirmed before ordering.
Applications
Pick-and-Place Head
Mount a small gripper on the 10 mm stroke table for precise vertical or horizontal pick-and-place of electronic components with minimal deflection.
Small-Parts Transfer
Use the symmetrical cross-roller slide to push or index small parts between conveyor stations with repeatable guided positioning.
Assembly Stage Stop
Deploy the AS rubber-stopper extension-side adjuster as a controlled stop in a compact assembly cell where the table contacts and positions a workpiece.
FAQ
What does the AS adjuster code mean on the HLSL16X10SAS?
AS means an adjustable rubber stopper is fitted on the extension side. The retraction side keeps the basic bumper cushion. If you need shock absorbers, choose B for both ends or BF for the retraction side only.
What is the maximum operating pressure for the HLSL16 bore 16 slide table?
The maximum working pressure is 0.7 MPa (100 psi). The operating range for bore 16 is 0.15-0.7 MPa (22-100 psi). Proof pressure is 1.2 MPa (175 psi). Use meter-out speed control to keep travel within 50-500 mm/s.