Airtac HLSL Precision Slide Table Cylinder HLSL16X10SB
The AirTAC Airtac HLSL Precision Slide Table Cylinder HLSL16X10SB is a genuine HLS slide-table cylinder, 16 mm bore: a double-acting dual-rod air cylinder integrated with a cross-roller guide so the table travels straight with high rigidity and low deflection. It delivers about 151 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guidecross-roller guide
- Bore16 mm
- Push thrust @0.5 MPa151 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port sizeM5x0.8
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
About the Airtac HLSL Precision Slide Table Cylinder HLSL16X10SB
The HLSL16X10SB is a genuine AirTAC double-acting dual-rod slide-table cylinder pairing an air cylinder with a cross-roller linear guide for straight, low-deflection travel under load. The cross-roller construction provides high precision and rigidity, and the symmetrical body permits mounting on either side for balanced installations. A floating joint protects the dual rods from side torque, and the two rods together deliver higher thrust than a single-rod equivalent. Bore 16 with a 10 mm stroke is a compact configuration for short-travel guided positioning. The B adjuster adds shock absorbers on both ends for smoother end-of-stroke deceleration.
This is a genuine AirTAC part with a magnet fitted as standard, supporting CMSH, DMSH and EMSH magnetic switches in the body slots. We verify thrust, dimensions and load/moment figures from the published datasheet or on-page specification table on request.
Airtac HLSL Precision Slide Table Cylinder HLSL16X10SB Technical Specifications
| Model | Airtac HLSL Precision Slide Table Cylinder HLSL16X10SB |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLSL (cross-roller guide) |
| Bore | 16 mm |
| Push thrust @0.5 MPa | 151 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Bore 16 gives moderate thrust for this slide-table size; step up to bore 20 or 25 for more push or down to bore 12 for lighter-duty tasks. The HLS cross-roller guide is selected when precision and rigidity matter most, while HLQ ball-bearing guides suit anti-rust and dust-proof applications. The 10 mm stroke fits within the bore 16 range for short-stroke positioning. The B adjuster provides shock absorbers on both extension and retraction ends for controlled stopping; choose AS or AF for a rubber stopper on one side only, or BS for a shock absorber on the extension side. Thread is PT; G and NPT versions use separate model codes.
We confirm load, moment and kinetic-energy limits from the published Wmax, Emax and deflection curves and tables before you order.
Applications
Gripper Traverse
Attach a gripper to the symmetrical cross-roller table for a short 10 mm traverse that picks and releases parts with repeatable precision and shock-absorber-protected stops.
Assembly Stage Index
Index a workpiece carrier between two assembly positions using the dual-rod slide, with shock absorbers on both ends for gentle deceleration at each stop.
Probe Contact Station
Drive a test probe into contact with a PCB or component on the 10 mm stroke, relying on the cross-roller guide for repeatable positioning and the B shock absorbers for controlled contact force.
FAQ
What is the difference between the B and AS adjuster options on the HLSL16 cross-roller slide table?
B fits shock absorbers on both ends for smoother deceleration at higher speeds or heavier loads. AS fits an adjustable rubber stopper on the extension side only, with the basic bumper on the retraction side. Choose B when you need controlled stopping energy absorption on both strokes.
Can I confirm the allowable load and moment for the HLSL16X10SB before ordering?
Yes. Load, moment and kinetic-energy limits are published as Wmax, Emax and deflection tables and curves in the datasheet. We verify your application against these figures on request so you order the correct bore and guide combination.