Airtac HLSL Precision Slide Table Cylinder HLSL16X10SBF
The AirTAC Airtac HLSL Precision Slide Table Cylinder HLSL16X10SBF is a genuine HLS slide-table cylinder, 16 mm bore: a double-acting dual-rod air cylinder integrated with a cross-roller guide so the table travels straight with high rigidity and low deflection. It delivers about 151 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guidecross-roller guide
- Bore16 mm
- Push thrust @0.5 MPa151 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port sizeM5x0.8
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLSL Precision Slide Table Cylinder HLSL16X10SBF
The HLSL16X10SBF is a genuine AirTAC double-acting dual-rod slide-table cylinder that combines an air cylinder with a cross-roller linear guide for precise, low-deflection guided travel. The cross-roller guide delivers high rigidity and load capacity, and the symmetrical body supports mounting on either side for flexible installation. A floating joint prevents side torque from reaching the dual rods, while the two rods together produce higher thrust than a single-rod cylinder of the same bore. Bore 16 with a 10 mm stroke is suited to short-travel positioning tasks. The BF adjuster places a shock absorber on the retraction side for controlled deceleration during the return stroke.
This is a genuine AirTAC part with a magnet fitted as standard, compatible with CMSH, DMSH and EMSH magnetic switches in the body slots. We confirm thrust, dimensions and load/moment data from the published datasheet or on-page specification table on request.
Airtac HLSL Precision Slide Table Cylinder HLSL16X10SBF Technical Specifications
| Model | Airtac HLSL Precision Slide Table Cylinder HLSL16X10SBF |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLSL (cross-roller guide) |
| Bore | 16 mm |
| Push thrust @0.5 MPa | 151 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Bore 16 offers moderate thrust for a compact slide table; select a larger bore when more push is needed or a smaller bore for lighter loads. The HLS cross-roller guide is the right choice when precision, rigidity and minimal deflection are critical, whereas HLQ ball-bearing guides are preferred for dust-proof or anti-rust environments. The 10 mm stroke is within the bore 16 range for short-stroke guided positioning. The BF adjuster adds a shock absorber on the retraction side for smooth return-stroke stopping; choose B for both ends or AS for an extension-side rubber stopper. Thread is PT; G and NPT are available under separate model codes.
We verify allowable load, moment and kinetic energy against the published Wmax, Emax and deflection tables and curves on request.
Applications
Retract-and-Latch
Use the BF retraction-side shock absorber for a controlled return stroke when pulling a latch or pin out of engagement, with the cross-roller guide maintaining alignment.
Workpiece Ejector
Eject a finished part on the extension stroke and retract smoothly using the retraction-side shock absorber, keeping cycle time fast without harsh return impact.
Clamp-and-Release Station
Extend the dual-rod table to clamp a workpiece and retract with shock-absorber-controlled deceleration, relying on cross-roller precision for repeatable clamping position.
FAQ
What does the BF adjuster code mean on the HLSL16X10SBF?
BF means a shock absorber is fitted on the retraction side only, with the basic bumper cushion on the extension side. This suits applications where the return stroke carries more momentum or needs softer stopping. Choose B if you need shock absorbers on both ends.
What speed range is supported by the HLSL16 bore 16 cross-roller slide table?
The recommended speed range is 50-500 mm/s, controlled with meter-out flow control. The maximum operating pressure is 0.7 MPa (100 psi) with an operating range of 0.15-0.7 MPa (22-100 psi) for bore 16.