Airtac HLSL Precision Slide Table Cylinder HLSL16X125S
The AirTAC Airtac HLSL Precision Slide Table Cylinder HLSL16X125S is a genuine HLS slide-table cylinder, 16 mm bore: a double-acting dual-rod air cylinder integrated with a cross-roller guide so the table travels straight with high rigidity and low deflection. It delivers about 151 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guidecross-roller guide
- Bore16 mm
- Push thrust @0.5 MPa151 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port sizeM5x0.8
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLSL Precision Slide Table Cylinder HLSL16X125S
The HLSL16X125S is a symmetrical double-acting dual-rod slide-table cylinder combining an air cylinder with a cross-roller linear guide for straight, rigid travel with minimal deflection. The dual-rod layout doubles thrust versus a single-rod equivalent, and the floating joint protects the rods from side torque. A 16 mm bore with a 125 mm stroke provides moderate thrust over a long guided travel range. This model has a basic bumper cushion with no additional adjuster.
This is a genuine AirTAC part fitted with a standard magnet for position detection. Sensor switches from the CMSH, DMSH, or EMSH series install in the magnetic-switch slots on the cylinder body. We confirm thrust, dimensions, allowable load, and moment from the AirTAC datasheet or on-page spec table on request.
Airtac HLSL Precision Slide Table Cylinder HLSL16X125S Technical Specifications
| Model | Airtac HLSL Precision Slide Table Cylinder HLSL16X125S |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLSL (cross-roller guide) |
| Bore | 16 mm |
| Push thrust @0.5 MPa | 151 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
A 16 mm bore suits applications needing moderate thrust; select a larger bore for higher push force. The HLSL cross-roller guide offers the highest precision and rigidity among the HL sub-families, making it ideal when deflection must be minimised over a long 125 mm stroke. Confirm that 125 mm is within the stroke range listed in the bore's datasheet. This unit uses basic bumper cushioning; if you need rubber stoppers or shock absorbers, choose an A or B adjuster variant. Thread is PT standard; request G or T for G or NPT ports. We verify load and moment against published AirTAC tables and deflection curves before ordering.
Applications
Long-Stroke Part Transfer
The 125 mm cross-roller guided stroke suits transferring parts along a conveyor loading station where straight, rigid travel over distance is essential.
Sorting Diverter Slide
Symmetrical body geometry and dual-rod thrust make this model a good fit for a sorting diverter that pushes items a long guided distance with repeatable positioning.
Adjustable Stopper Positioning
Cross-roller precision and a long stroke allow use as an adjustable stopper slide that repositions a stop block accurately along a 125 mm range.
FAQ
Does HLSL16X125S come with a magnet for position sensing?
Yes. Every HL-series slide table is magnet-fitted as standard. The S in the model code denotes the magnet. Compatible sensor switches are from the CMSH, DMSH, and EMSH series, mounted in the body slots.
Can I use this cylinder at 1.0 MPa?
No. The maximum working pressure is 0.7 MPa (100 psi). For a 16 mm bore the operating pressure range is 0.15 to 0.7 MPa (22 to 100 psi). Proof pressure is 1.2 MPa but that is a test value only, not for continuous operation.