Airtac HLSL Precision Slide Table Cylinder HLSL16X125SA
The AirTAC Airtac HLSL Precision Slide Table Cylinder HLSL16X125SA is a genuine HLS slide-table cylinder, 16 mm bore: a double-acting dual-rod air cylinder integrated with a cross-roller guide so the table travels straight with high rigidity and low deflection. It delivers about 151 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guidecross-roller guide
- Bore16 mm
- Push thrust @0.5 MPa151 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port sizeM5x0.8
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLSL Precision Slide Table Cylinder HLSL16X125SA
The HLSL16X125SA is a symmetrical double-acting dual-rod slide-table cylinder that integrates an air cylinder with a cross-roller linear guide for precise, rigid travel with low deflection. The dual-rod design doubles thrust compared to a single-rod cylinder, and the floating joint prevents side torque from reaching the rods. With a 16 mm bore and 125 mm stroke, this model delivers moderate thrust over a long guided range. The A adjuster code means adjustable rubber stoppers are fitted at both extension and retraction ends for fine-tuned end-of-stroke cushioning.
This is a genuine AirTAC part with a standard magnet for position sensing. Compatible sensor switches include CMSH, DMSH, and EMSH series, installed in the magnetic-switch slots on the body. We confirm thrust, dimensions, load, and moment from the AirTAC datasheet or on-page spec table on request.
Airtac HLSL Precision Slide Table Cylinder HLSL16X125SA Technical Specifications
| Model | Airtac HLSL Precision Slide Table Cylinder HLSL16X125SA |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLSL (cross-roller guide) |
| Bore | 16 mm |
| Push thrust @0.5 MPa | 151 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Select a 16 mm bore for moderate thrust applications; move to a larger bore when more push force is needed. The HLSL cross-roller guide provides the highest precision and rigidity in the HL family, ideal for long-stroke guided travel where deflection must stay minimal. Verify that 125 mm is within the stroke range for this bore in the datasheet. The A adjuster adds adjustable rubber stoppers at both ends, letting you fine-tune end-position cushioning without the cost of shock absorbers. Thread is PT as standard; request G or T for alternative thread standards. We verify allowable load, moment, and deflection against published AirTAC tables and curves before you order.
Applications
Precision Assembly Traverse
Cross-roller guidance with adjustable rubber stoppers suits a long-stroke assembly traverse where a workpiece is moved 125 mm and end positions must be fine-tuned for repeatability.
Gripper Shuttle Slide
The symmetrical dual-rod body and long guided stroke make this model ideal for a gripper shuttle that transports parts between stations over a wide range with minimal lateral play.
Component Insertion Stage
Adjustable rubber stoppers at both ends allow precise end-position control on a 125 mm insertion slide for placing components into fixtures with controlled contact.
FAQ
What is the difference between the A and B adjuster codes on HLSL cylinders?
The A code means adjustable rubber stoppers are fitted at both ends for cushioned end-of-stroke positioning. The B code means shock absorbers are fitted at both ends for higher energy absorption. B-type adjusters are not available on bore 6. AS or AF variants place the stopper or absorber on only one side.
How do I confirm the load and moment capacity for HLSL16X125SA?
Allowable load, moment, and deflection are published as tables and curves in the AirTAC datasheet for this sub-family and bore. We confirm these values against the published data before you order, so the slide is correctly sized for your application.